D-Link DCS-2630L rev. A IP Camera Firmware 1.03.03 Download

Posted at December 24, 2024 by PCI-DB Team

D-Link DCS-2630L rev. A IP Camera Firmware 1.03.03 Description

New Features:

1. Support H/W version A2 D-Mic.
2. Support Rescue mode in Bootloader.
3. Update mydlink agent to version 2.0.20-b33
4. Change the link location for D-Link support site. (www.dlink.com)
5. Support "None" option for SMTP mail security.
6. Update mDNSResponder version to v576.30.4 for the security enhancement. (Bonjour)

Problems Fixed:

1. Check DUT CSRF protection issue, DUT web UI could be browsed with incorrect http referer and didn't need authentication.
2. Firefox plug is busy easily when viewing the live streaming with 1920x1080.
3. Show real MAC address in status page whatever using client mode or direct mode connection.
4. DUT couldn't wireless connect to DIR-880L when DUT security mode is WPA-PSK and cipher type is TKIP/AES.
5. DUT RTSP stream 2 have no audio.
6. After upload signed certificate, DUT would show doesn't match with original certificate request.
7. DUT motion detection trigger time is the second snapshot rather than the fourth snapshot.

Upgrading Instructions:

Follow the steps below to upgrade the firmware:
1. Download the latest firmware file. The file is in .bin file format.
2. Log-in camera web UI and enter setup/Maintenance/Firmware upgrade 3. Click Browse… and specify the firmware file.
3. Click Upgrade. The camera starts to upgrade and will reboot automatically when the upgrade completes.

How to update your camera firmware:

- Check your connections. Make sure your device is connected to your router with an Ethernet cable for the upgrade process. Do not use a wireless connection when upgrading the firmware.
- Also, make sure you use a computer connected to the same router as your device. Do not perform this process through a remote connection to your device over the Internet.
- Download the firmware to your PC and then unzip it if necessary.
- Open your device’s web interface. To do this run your device’s Setup Wizard and write down the IP Address for your device then write that IP Address into your web browser and login as admin with your password for it.
- Go to MAINTENANCE > Firmware Upgrade to go to the Firmware Upgrade page. Click “Browse” and then select the firmware file you saved and unzipped on your computer in the previous steps.
- After selecting the firmware file, click Upload to start the upgrade process.
- The upgrade process will begin, and will take about 2-3 minutes to complete. Do not start or use other applications while upgrading your device’s firmware, and do not hit Stop, Back, or Reload in your web browser during the upgrade process.
- Once the upgrade process is complete, click on the Firmware Upgrade link on the left to return to the Firmware Upgrade page.
- Verify that the Current Firmware Version matches the version of the firmware you uploaded. The upgrade process is complete, and you can close your web browser. 

About Wireless LAN Drivers:

Windows OSes usually apply a generic driver that allows systems to recognize the wireless component. However, in order to use all available features of this hardware, you must install the appropriate drivers.

Enabling the wireless card allows systems to read chipset information and manufacturer name, as well as connect to a network without using an Ethernet cable.

Updating the driver version can resolve different compatibility issues, fix related errors spotted throughout the product's usage, add support for new operating systems, improve transfer speed, as well as bring various other changes.

As for applying this release, the installation steps should not pose to much of a challenge since each producer intends to make the procedure as easy as possible: just download the package, run the setup, and follow the on-screen instructions.

Bear in mind that we do not recommend you install this release on OSes other than the specified ones even though other platforms might also be suitable. Also, when the update has finished, do perform a restart to ensure that all changes take effect properly.

Therefore, if you wish to apply this package, click the download button, and setup the wireless card on your system. Moreover, if you want to stay “updated one minute ago,” check with our website as often as possible.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related DLINK Drivers