Leica M (Typ 240) Camera Firmware 2.0.1.5 Download
Posted at December 3, 2024 by PCI-DB Team
Install Driver AutomaticallyLeica M (Typ 240) Camera Firmware 2.0.1.5 Description
Fixes:
- Improved description of the lens type in Exif-Data
- Live view is now possible with every lens (including older screw lenses via an adapter) using “manual lens detection”
- A “Video off” option is now available in the Set menu (see submenu item “Video recording”) The M-Button on the Top-cover is deactivated when this option is chosen.
- The Horizon (level) is now visible in Live View, overlaying the live image. This additional info-screen is enabled using the menu item “Horizon”
- Exposure simulation -> Permanent: Live View accurately shows image brightness according to the shutter speed and aperture set in manual exposure (as long as the chosen exposure time is shorter than 1/30s)
- Exposure simulation -> Release button half-pressed: Image brightness in live view is adjusted for best visibility, regardless of the actual exposure. Half pressing the shutter button shows the actual exposure.
- All Auto ISO options are now visible using the ISO button
- Extra options for “Maximum Exposure Time” - 1x, 2 x, or 4x focal length - can be selected to help avoid camera shake when using auto ISO and long lenses.
- “Auto ISO in M mode” is now offered as an option. This varies ISO sensitivity for correct exposure when shutter speed and aperture are set manually.
- Alternatively the camera chooses the previous manually chosen ISO speed
- Crop marks: In Live View, new crop marks for 3:4 / 6:7 / 1:1 / and 16:9 aspect ratios can be displayed. By pressing the up/down keys, the crop marks are superimposed on the live view screen (without additional information)
- Korean is now available as a menu language
- During video recording, 1/25s is now used instead of 1/24s. This reduces flicker effects with 50Hz mains voltage
- Exposure bracketing settings are now saved when the camera is switched off
- Direct exposure correction: An “EV correction” option in the menu enables direct adjustment. So EV compensation can be altered by turning the thumb wheel, without having to press additional buttons.
- New Light Metering Mode “Classic / LV disabled”: In this mode, only Classic light-metering is possible; the LV button is disabled to avoid the activation of live view by accident.
- New menu item “Focus Peaking”: For improved visibility, the color of focus peaking can now be set to red, green or blue.
- Better display of GPS location data: Position is now shown for JPG files in Adobe Lightroom. Where the GPS signal is weak, the last position is now deleted after 5min instead of 24h as in previous firmware versions.
- Bugfix in Live View at high temperatures: Occasional malfunction of Live View at high temperatures has been fixed
- Bugfix in light metering (Live view)
- Bugfix regarding sensor cleaning function
It is highly recommended to always use the most recent driver version available.
Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.
Related Leica Drivers