Posted at November 21, 2024 by PCI-DB Team
Install Driver AutomaticallyDevice Name | Gargoyle Firmware 1.10.0 (ar71xx-nand-wndr4300-squashfs-sysupgrade) |
---|---|
Category | Router Switch Access Point |
Manufacturer | Gargoyle |
File Size | 10.6 MB |
Supported OS | OS Independent |
- The recommended way to install Gargoyle is to Download the correct Gargoyle factory.bin image to your PC and then install the image onto your router using the original manufacturers GUI.
- Check the exact version of your router hardware carefully before selecting the download. Gargoyle images are available for many routers.
- If you get the error message “please choose a file to upgrade”, then rename the firmware file to something shorter (i.e. “gargoyle.bin”) and upload it again.
- Wait about 5 minutes then you should be able to connect to 192.168.1.1
- If after 5 minutes 192.168.1.1 is unresponsive first reboot your PC and try again.
- If after 20 minutes 192.168.1.1 is unresponsive you may reboot both PC and router.
- If you make a mistake installing this software, it is possible to permanently disable your router, effectively turning it into a brightly colored brick. Bricked routers aren't very useful – you can use one to beat someone about the head or as modern art, but that's about it. You can pretty much eliminate this risk by following the directions given here so please read them first before attempting to install Gargoyle.
- Gargoyle is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. The author(s) of Gargoyle assume ZERO liability for any damage caused by this software.
Before you consider downloading this firmware, go to the system information page of the router and make sure that the currently installed version isn't either newer or matching this release.
Due to the large variety of router models and different methods for upgrading the device, it is highly recommended that you read and, above all, understand the installation steps before you apply the new firmware, even if you are a power user.
In theory, these steps shouldn't be much of a hassle for anyone, because manufacturers try to make them as easy as possible, even if they don't always succeed. Basically, you must upload the new firmware to the router through its administration page and allow it to upgrade.
If you install a new version, you can expect increased security levels, different vulnerability issues to be resolved, improved overall performance and transfer speeds, enhanced compatibility with other devices, added support for newly developed technologies, as well as several other changes.
If you're looking for certain safety measures, remember that it would be best if you perform the upload using an Ethernet cable rather than a wireless connection, which can be interrupted easily. Also, make sure you don't power off the router or use its buttons during the installation, if you wish avoid any malfunctions.
If this firmware meets your current needs, get the desired version and apply it to your router unit; if not, check with our website as often as possible so that you don't miss the update that will improve your device.
It is highly recommended to always use the most recent driver version available.
Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.
Device Type: Router Switch Access Point File Size: 3.5 MB OS Independent
Install DriverDevice Type: Router Switch Access Point File Size: 15.2 MB OS Independent
Install DriverDevice Type: Router Switch Access Point File Size: 1.1 MB OS Independent
Install DriverDevice Type: Router Switch Access Point File Size: 8.5 MB OS Independent
Install DriverDevice Type: Router Switch Access Point File Size: 15.1 MB OS Independent
Install DriverDevice Type: Router Switch Access Point File Size: 1.2 MB OS Independent
Install DriverDevice Type: Router Switch Access Point File Size: 7.1 MB OS Independent
Install DriverDevice Type: Router Switch Access Point File Size: 3.1 MB OS Independent
Install DriverDevice Type: Router Switch Access Point File Size: 2.5 MB OS Independent
Install DriverDevice Type: Router Switch Access Point File Size: 7.9 MB OS Independent
Install DriverFind Missing Drivers
Recent Devices
© 2024 PCI-DB.com - PCI Database Replacement. All rights reserved.