Western Digital Universal Firmware Updater 3.2.4.2B Download

Posted at November 2, 2024 by PCI-DB Team

Western Digital Universal Firmware Updater 3.2.4.2B Description

WD Universal FW Updater Fixes:

- Updated to meet the new Compliance requirement.
- Fixes an issue where the drive is not mounted after the computer exits sleep mode for some users.
- Reduced standby power consumption on desktop products.
- Fixes an issue on some systems where the drive would not mount after a cold boot.

Firmware 1.012 Fixes:

- Updated to meet the new Compliance requirement.

For the following drives with a P/N that ends with -05:
- My Passport Air
- My Passport Slim
- My Passport Essential
- WD Elements Portable

Firmware 1.065 Fixes:

- Fixes an issue where the drive is not mounted after the computer exits sleep mode for some users.
- Reduced standby power consumption on desktop products.
- Fixes an issue on some systems where the drive would not mount after a cold boot.

For the following drives with a P/N that ends with -04:
- My Book (USB 3.0 and USB 2.0)
- My Book Essential (USB 3.0 and USB 2.0)
- My Book for Mac (USB 3.0 and USB 2.0)
- WD Element
- My Passport
- My Passport Edge
- My Passport Edge for Mac
- My Passport Ultra
- My Passport Slim
- My Passport Air
- My Passport Enterprise
- WD Elements SE Portable

Firmware 1.016 Fixes:

- This firmware update fixes the drive’s handling of infrequent ECC errors which can cause data access issues.

For the following drives with a P/N that ends with -00:
- My Book Essential (USB 3.0 and USB 2.0)
- My Passport Essential (USB 3.0 and USB 2.0)
- My Passport Essential SE (USB 3.0 and USB 2.0)

Firmware 1.025 Fixes:

- Now works with My Passport Slim portable drives.

For the following drives with a P/N that ends with -01:
- My Book Essential (USB 3.0 and USB 2.0)
- My Book Studio (USB 3.0 and USB 2.0)
- My Book for Mac (USB 3.0 and USB 2.0)
- My Passport (USB 3.0 and USB 2.0)
- My Passport for Mac (USB 3.0 and USB 2.0)
- My Passport Essential (USB 3.0 and USB 2.0)
- My Passport Essential SE (USB 3.0 and USB 2.0)
- My Passport
- My Passport Ultra
- My Passport Slim
- My Passport Air
- My Passport Edge
- My Passport Enterprise
- WD Elements SE Portable

Firmware2.018/2.019 Fixes:

- This firmware version includes support for Mac OS-X Tiger.

Compatibility:
- My BookEssential (+ WD SmartWare)
- My Book for Mac (+ WD SmartWare)
- My Book Elite (+ WD SmartWare)
- My Passport Essential (+ WD SmartWare)
- My Passport Essential SE (+ WD SmartWare)
- My Passport for Mac (+ WD SmartWare)
- My Passport SE for Mac (+ WD SmartWare)
- My Passport Elite (+ WD SmartWare)
- My Passport

Firmware1.012 Fixes:

- Works better with some operating systems and disk utilities with regards to data cluster alignment on the disk.

Compatibility:
- My Book Studio (+ WD SmartWare)
- My Passport Studio (+ WD SmartWare)

Firmware1.014 Fixes:

- Initial Release

Compatibility:
- My Passport Studio LX (+ WD SmartWare)

Firmware1.041 Fixes:

- Initial Release

Compatibility:
- My Passport Studio

Firmware1.049 Fixes:

- VCD device does not always mount when connected via Firewire on Mac.

Compatibility:
- My Book Studio (+ WD SmartWare) without the Electronic Paper Display

Firmware1.017 Fixes:

- Initial Release

Compatibility:
- Studio Edition II

Firmware1.049 Fixes:

- Fixed drive occasionally failing to re-enumerate after a system warm reboot.

Compatibility:
- My Passport
- My Passport Edge
- My Passport Edge for Mac
- My Passport Ultra
- My Passport Slim
- My Passport Air
- WD Elements SE Portable

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Western Digital Drivers