Gigabyte GA-D525TUD (rev. 1.4) Intel Chipset Driver 9.1.1.1025 Download
Posted at November 23, 2024 by PCI-DB Team
Install Driver Automatically| Device Name | Gigabyte GA-D525TUD (rev. 1.4) Intel Chipset Driver 9.1.1.1025 |
|---|
| Category | Motherboard |
|---|
| Manufacturer | Intel |
|---|
| File Size | 1.2 MB |
|---|
| Supported OS | Windows XP ,Windows Vista ,Windows XP 64 bit ,Windows Vista 64 bit ,Windows 7 ,Windows 7 64 bit |
|---|
Gigabyte GA-D525TUD (rev. 1.4) Intel Chipset Driver 9.1.1.1025 Description
CPU
- Built in with an Intel Dual-core Atom D525 processor (1.8 GHz)
* Do not disassemble the onboard CPU/chipset and the heatsinks/fan by yourself to avoid damage to these components.
- 1M L2 cache
Chipset
- Intel NM10
Memory
- 2 x 1.5V DDR3 DIMM sockets supporting up to 4 GB of system memory
* Due to Windows 32-bit operating system limitation, when the 4 GB of physical memory is installed, the actual memory size displayed will be less than 4 GB.
- Support for DDR3 800 MHz memory modules
Audio
- Realtek ALC887 codec
- High Definition Audio
- 2/4/5.1/7.1-channel
* To enable 7.1-channel audio, you have to use an HD front panel audio module and enable the multi-channel audio feature through the audio driver.
LAN
- 1 x Realtek RTL8111F chip (10/100/1000 Mbit)
Expansion Slots
- 1 x PCI slot
Storage Interface Chipset:
- 2 x SATA 3Gb/s connectors (SATA2_0, SATA2_1) supporting up to 2 SATA 3Gb/s devices
GIGABYTE SATA2/JMicron JMB363 chip:
- 1 x IDE connector supporting ATA-133/100/66/33 and up to 2 IDE devices
- 2 x SATA 3Gb/s connectors (GSATA2_0, GSATA2_1) supporting up to 2 SATA 3Gb/s devices
* When installing Windows XP onto the hard drive connected to the JMicron JMB363 controller, be sure to connect the optical drive to a SATA port controlled by the Intel chipset.
- Support for SATA RAID 0, RAID 1, and JBOD
USB Chipset:
- Up to 8 USB 2.0/1.1 ports (4 on the back panel, 4 via the USB brackets connected to the internal USB headers)
Internal I/O Connectors
- 1 x 20-pin ATX main power connector
- 1 x 4-pin ATX 12V power connector
- 1 x IDE connector
- 4 x SATA 3Gb/s connectors
- 1 x CPU fan header
- 1 x system fan header
- 1 x front panel header
- 1 x front panel audio header
- 2 x USB 2.0/1.1 headers
- 1 x serial port header
- 1 x chassis intrusion header
- 1 x power LED header
Back Panel Connectors
- 1 x PS/2 keyboard port
- 1 x PS/2 keyboard port
- 1 x parallel port
- 1 x serial port
- 1 x D-Sub port
- 4 x USB 2.0/1.1 ports
- 1 x RJ-45 port
- 3 x audio jacks (Line In/Line Out/Microphone)
I/O Controller
- iTE I/O Controller Chip
H/W Monitoring
- System voltage detection
- CPU temperature detection
- CPU/System fan speed detection
- CPU fan speed control
BIOS
- 2 x 4 Mbit flash
- Use of licensed AWARD BIOS
- Support for DualBIOS
- PnP 1.0a, DMI 2.0, SM BIOS 2.4, ACPI 1.0b
Unique Features
- Support for @BIOS
- Support for Q-Flash
- Support for Xpress BIOS Rescue
- Support for Download Center
- Support for Xpress Install
- Support for Xpress Recovery2
- Support for EasyTune
* Available functions in EasyTune may differ by motherboard model.
- Support for SMART Recovery
- Support for Auto Green
- Support for ON/OFF Charge
- Support for Q-Share
Bundle Software
- Norton Internet Security (OEM version)
Form Factor
- Mini-ITX Form Factor; 17.0cm x 17.0cm
Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer. It is highly recommended to always use the most recent driver version available.
Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.
Related Intel Drivers