Gigabyte GA-J1800N-D2H (rev. 1.0) Intel Graphics Driver 15.33.7.64.3366 for Windows 8/Windows 8.1 64-bit Download

Posted at December 22, 2024 by PCI-DB Team

Gigabyte GA-J1800N-D2H (rev. 1.0) Intel Graphics Driver 15.33.7.64.3366 for Windows 8/Windows 8.1 64-bit Description

Specifications:

- CPU
Built in with an Intel Dual-Core Celeron J1800 SoC (2.41 GHz)
Do not disassemble the onboard SoC and the heatsinks by yourself to avoid damage to these components.
1 MB Cache

- Memory
2 x 1.35V DDR3L DIMM sockets supporting up to 8 GB of system memory
Dual channel memory architecture
Support for DDR3L 1333 MHz memory modules
Support for non-ECC memory modules

- Onboard Graphics
Integrated in the SoC:
1 x D-Sub port, supporting a maximum resolution of 2560x1600
1 x HDMI port, supporting a maximum resolution of 1920x1080

- Audio
Realtek ALC887 codec
High Definition Audio
2/4/5.1/7.1-channel
Support for S/PDIF Out

- LAN
Realtek GbE LAN chip (10/100/1000 Mbit)

- Expansion Slots
1 x PCI Express x1 slot
1 x Mini PCI Express x1 slot

- Storage Interface
SoC:
2 x SATA 3Gb/s connectors

- USB
SoC:
1 x USB 3.0/2.0 port on the back panel
SoC + GL850S USB 2.0 Hub:
6 x USB 2.0/1.1 ports (4 ports on the back panel, 2 ports available through the internal USB header)

- Internal I/O Connectors
1 x 24-pin ATX main power connector
1 x 4-pin ATX 12V power connector
2 x SATA 3Gb/s connectors
1 x USB 2.0/1.1 header
1 x CPU fan header
1 x system fan header
1 x front panel header
1 x front panel audio header
1 x serial port header
1 x parallel port header
1 x S/PDIF Out header
1 x debug card header
1 x Clear CMOS jumper
1 x chassis intrusion header

- Back Panel Connectors
1 x PS/2 keyboard port
1 x PS/2 mouse port
1 x D-Sub port
1 x HDMI port
1 x USB 3.0/2.0 port
4 x USB 2.0/1.1 ports
1 x RJ-45 port
3 x audio jacks (Line In, Line Out, Mic In)

- I/O Controller
iTE I/O Controller Chip

- H/W Monitoring
System voltage detection
CPU/System temperature detection
CPU/System fan speed detection
CPU/System fan speed control

- BIOS
1 x 64 Mbit flash
Use of licensed AMI UEFI BIOS
PnP 1.0a, DMI 2.0, SM BIOS 2.6, ACPI 2.0a

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related INTEL Drivers