Grandstream HT702 ATA Firmware 1.0.8.2 Beta Download

Posted at December 18, 2024 by PCI-DB Team

Grandstream HT702 ATA Firmware 1.0.8.2 Beta Description

BUG FIXES:

- Fixed during concurrent call performance test, other devices cannot hear the audio from HT7XX
- Fixed device sometimes enters fax mode during a call
- Fixed incoming INVITE gets rejected under TCP/TLS specific scenario
- Fixed under TFTP upgrade mode, sometimes device cannot upgrade or access the WebUI
- Fixed device sometime failed to boot-up after firmware upgrade
- Fixed WEB_UI status page DID always displays NO with or without a DID assigned
- Fixed device failed to boot up if setting the wrong format address on option 66
- Fixed during a CW call flash back to the 1st leg and hanging up the second leg can cause the HT802 to initiate a call transfer
- Fixed NAPTR/SRV change does not take effect without reboot
- Fixed option "Outgoing Call Duration Limit" does not take effect without reboot
- Fixed “Force Timer” will not take effect if “Can Reinvite” is set
- Fixed [TR-069]: Missing Parameters
- Fixed “SIP Registration Failure Retry Wait Time” is fixed in 20 minutes when receiving 403 Forbidden
- Fixed [BJ Telcom] Attended Transfer failure
- Fixed Pulse Dialing does not work
- Fixed under "Enabled and forced" SRTP Mode, device cannot set up call with IPPhone
- Fixed Time Zone "GMT+12:00 (Auckland, Wellington)" shows wrong time
- Fixed New Zealand time zone shows wrong time
- Fixed XML Parser does not take multi-line P values in config file
- Fixed SIP TLS Private key and certificate cannot be provisioned using XML
- Fixed DNS-SRV connection failed if first option is unavailable using TCP
- Fixed crash issue with core dump
- Fixed device will never register if the 1st and 2nd NTP request at boot up have different time
- Fixed device does not register if DNS server responds without a IP address A record
- Fixed all ports stopped working under auto dial performance test
- Fixed device does not take an IP-Address from PPPoE server through VLAN
- Fixed FSK tone heard locally on outgoing call under Broadsoft special mode
- Fixed during SIP registration device does not use the shortest expires time between the proxy and it's locally configured timer
- Fixed device port did not work after the phone Hold/Unhold many times
- Fixed device sends a wrong stop Tone if CID exceeds 9 digits
- Set TLSv1 protocol to be used with wget
- Fixed MWI issue
- Fixed Event lost issue during performance testing
- Added support of 3-Way Conference utilizing MTAS Ad-Hoc Conference
- Add configurable option to enable/disable Connected Line ID Presentation
- Added option for Fax Tone Detection Mode
- Customized 3WC and transfer features
- Added Call limit option on HT702 and HT704
- Added support to hide passwords from command line
- Updated time settings for Moscow, Russia
- Added support of sending SIP options messages to verify connectivity to the SIP server
- Added option to enable/disable Crypto life time when using SRTP
- Added support for DHCP OPTION 160
- Added option to disable PnP SUBSCRIBE
- Changed "Use Random SIP Port" to correct P values. Set "Enable High Ring Power" to “Yes” in China ITSP mode.
- Added support to redirect firmware/config file upgrade request upon receiving HTTP 302 response
- Modified provisioning download to work when protocol is changed from HTTP to HTTPS

About VoIP System Updates:

Firmware updates for VoIP Systems are very complex and usually contain many bug fixes, security improvements and compatibility enhancements, because the base system must be able to connect to webcams, video conference devices and the like.

Upgrading your VoIP System firmware should be done as often as possible to keep your device up to date with new security standards, and improve the native plug and play capabilities of your device.

Although beta firmware are usually full of new and exciting features, updating to them should only be done after thoroughly reading the changelog and making sure that you still retain phone functionality. Remember to check if you can revert to a more stable version as well, in case the new update is not what you were expecting.

If you intend to apply this update, please make sure that the package is compatible with your VoIP System, hit the download button, follow the installation instructions and enjoy. Check out our website as often as possible in order to keep your device “Updated one minute ago.” 

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Grandstream Drivers