Ford Bluetooth / Multimedia Firmware November 2012 Download

Posted at December 21, 2024 by PCI-DB Team

Install Driver Automatically

Device Name	Ford Bluetooth / Multimedia Firmware November 2012
Category	Firmware
Manufacturer	Other
File Size	54.8 MB
Supported OS	OS Independent

Ford Bluetooth / Multimedia Firmware November 2012 Description

The update to your Ford Bluetooth and multimedia module provides you with improvements in the following areas:

- Improved energy management in connection with USB and Bluetooth devices 

This download applies to the following vehicles and build dates, with the bluetooth and USB audio interface: 

- C-Max - February 2008 to January 2012
- Fiesta - July 2008 to December 2011
- Focus - February 2008 to January 2012
- Galaxy - September 2008 to January 2012
- Kuga - February 2008 to January 2012
- Mondeo - September 2008 to January 2012
- Ranger - From April 2009
- Transit - From June 2009

Preparation:

1. Download the update 
2. Format a USB memory stick, ensuring the file system is set to FAT32
3. Unzip the contents (all 21 items) of the zip file you just downloaded, and copy them to the root of the memory stick, i.e. without placing them in any folders.

Now, head to your car, unlock it, get in, and follow the steps below carefully:

1. Make sure your climate control is completely switched off to avoid the blower fan running which will cause the battery to drain faster. It's probably best to do this update after the vehicle has been driven for around 15 minutes or longer, to ensure the battery is freshly charged. If you receive low battery warnings during this procedure, it may cause the audio system to shut down and the update to fail.
In reality you should be absolutely fine, and my battery is probably just past its best (yes, I received a 'low battery' message when I did the first update), but it's worth being cautious!
2. Switch on the radio WITHOUT turning on the ignition
3. Insert the memory stick into the USB socket
4. If nothing appears on the screen, switch to the AUX/USB input. You will then receive a message stating that there are no media files on the device.
5. Now switch the ignition on but do not turn the engine on. If you don't have keyless start, turn the key two clicks to turn the ignition on. If you do have keyless start, press the button WITHOUT depressing the clutch (manual) or brake (automatic).
6. Now the radio should initialise and perform the update. It will display "Update running" (or words to that effect).
7. DO NOT switch off the ignition, or switch on the engine during this time. The update will take up to 20 minutes to apply, and it feels a lot longer if you're sitting watching it! Now would be a good time to make a cup of tea.

Once the update is finished, you will receive a confirmation message on the display briefly, and then it will switch back to radio playback. Power off the radio, then power it back up again and check the USB and Bluetooth functionality.

About Device Firmware:

Applying a newer firmware version than the one already installed on your unit can bring various enhancements, include workarounds for diverse problems encountered by the device, and improve or add newly developed features.

On the other hand, downgrading the firmware version can recover the device’s functionality in the event of a software update either turning up faulty or causing the unit’s overall performance to drop. However, bear in mind that applying an older firmware isn’t recommended and might not always be possible.

When it comes to the update steps, due to the large variety of devices and numerous ways for installing a new firmware, it is recommended that you carefully read and understand the upgrade steps, and consider applying a different firmware only when you have familiarized yourself with the update method.

As the installation process is most of the times quite risky, this step should be taken by users that have the ability to successfully complete the update; regular users may initiate it at their own risk. Moreover, it’s best that this task be performed in a steady power environment such as the one ensured by a UPS unit.

Therefore, if you consider applying this release, hit the download button, take into account all the aforementioned aspects, and update the device’s firmware. Also make sure you constantly check with our website to ensure that you don’t miss a single new release.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Other Drivers