PCI-DB.com
  1. Driver
  2. Hdd Ssd Nas Usb Flash
  3. Buffalo TS4800D NAS Firmware 2.90 for Mac OS

Buffalo TS4800D NAS Firmware 2.90 for Mac OS Download

Posted at December 24, 2024 by PCI-DB Team

Install Driver Automatically
Device NameBuffalo TS4800D NAS Firmware 2.90 for Mac OS
CategoryHdd Ssd Nas Usb Flash
ManufacturerBuffalo
File Size448.1 MB
Supported OSMac

Buffalo TS4800D NAS Firmware 2.90 for Mac OS Description

Added and Modified Features:

- Email Notifications: Modified so that the report categories and when the email will be sent are now configurable. The current settings will be taken over by the firmware update but we recommend verifying if the function works properly after the firmware update.
- Email Notifications: S.M.A.R.T information is now available to be sent via the notification email. It can be configured from "Advanced Report Settings".
- SNMP: SNMP protocol now support S.M.A.R.T. for each drive on the TeraStation. Update the MIB file of your SNMP client.

Bug Fixes:

- Failover: Fixed a bug where the failover could not be canceled temporarily if the online update notice is present.

Before updating the firmware:

- Do not turn off the TeraStation until the firmware update is complete and the "finished" message is displayed.
- USB drives may not be mounted automatically after updating the firmware. To mount them, unplug and then reconnect them.
- Disconnect iSCSI volumes with the iSCSI Initiator before updating the firmware.

How to Update the Firmware:

- Connect the TeraStation and a computer to run the updater on the same network subnet. The subnet masks should be the same and the first three numbers of the IP addresses should be the same. The last number of the IP addresses should be different.
- Exit all applications. Also, stop or exit any firewall software.
- Extract the downloaded file and run "TSUpdater.exe". When a TeraStation is detected, an update window will open.
- If multiple TeraStations are connected to the network, select which TeraStation to update.
- Click 'Update' and enter the TeraStation's administrator password.
- Click 'OK'.
- It will take several minutes for the firmware to update. During the update process, the info LED will blink. Don't disconnect or power down the TeraStation until the update is finished.
- When the update is finished, a message will be displayed.

About Network-Attached Storage Updates:

Upgrading the Network-Attached Storage (NAS) firmware can improve the system’s overall performance, stability, and security by adding various fixes for related issues, enhancing existing features (or adding support for new ones), or updating different applications.

Due to the high number of NAS manufacturers, as well as network storage types, installing a new firmware might not be always as easy as it appears – and not too safe either. Failing to perform a software update can cause serious malfunctions to the network storage.

So, before you even consider applying this release, carefully read the installation guide and initiate the process only when you have understood and completely familiarized yourself with all the steps.

Moreover, it would be best if you take into account using a UPS unit (Uninterruptible Power Supply) to perform this task, because no power disruption should affect the upgrade.

With all these aspects in mind, after you have read the installation guide, click the download button to apply this firmware version to your NAS. Remember to check back with our website in order to stay up to speed with the latest releases.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Buffalo Drivers

Buffalo TS-8VHL/R6 NAS Firmware Update 1.15

Device Type: Hdd Ssd Nas Usb Flash File Size: 383.5 MB Windows 2K ,Windows XP ,Windows Vista ,Windows Vista 64 bit ,Windows 7 ,Windows 7 64 bit ,Windows 8 ,Windows 8 64 bit

Install Driver

Buffalo LS520DE NAS Firmware 4.30

Device Type: Hdd Ssd Nas Usb Flash File Size: 129.7 MB Windows 7 ,Windows 7 64 bit ,Windows 8 ,Windows 8 64 bit ,Windows 8.1 ,Windows 8.1 64 bit ,Windows 10 ,Windows 10 64 bit ,Windows Mac

Install Driver

Buffalo WS5600DN2 WSS Firmware 2.90

Device Type: Hdd Ssd Nas Usb Flash File Size: 6.7 MB Windows Server 2012

Install Driver

Buffalo WS5400RN2 WSS Firmware 2.90

Device Type: Hdd Ssd Nas Usb Flash File Size: 6.7 MB Windows Server 2012

Install Driver

Buffalo LS510D NAS Firmware 4.30

Device Type: Hdd Ssd Nas Usb Flash File Size: 129.7 MB Windows 7 ,Windows 7 64 bit ,Windows 8 ,Windows 8 64 bit ,Windows 8.1 ,Windows 8.1 64 bit ,Windows 10 ,Windows 10 64 bit ,Windows Mac

Install Driver

Buffalo LS520D NAS Firmware 4.30

Device Type: Hdd Ssd Nas Usb Flash File Size: 129.7 MB Windows 7 ,Windows 7 64 bit ,Windows 8 ,Windows 8 64 bit ,Windows 8.1 ,Windows 8.1 64 bit ,Windows 10 ,Windows 10 64 bit ,Windows Mac

Install Driver

Buffalo WS5400DN2 WSS Firmware 2.90

Device Type: Hdd Ssd Nas Usb Flash File Size: 6.7 MB Windows Server 2012

Install Driver

Buffalo WS5600DR2 WSS Firmware 2.90

Device Type: Hdd Ssd Nas Usb Flash File Size: 6.7 MB Windows Server 2012

Install Driver

Buffalo WS5200DN2 WSS Firmware 2.90

Device Type: Hdd Ssd Nas Usb Flash File Size: 6.7 MB Windows Server 2012

Install Driver

Find Missing Drivers

© 2024 PCI-DB.com - PCI Database Replacement. All rights reserved.