Panasonic AU-XPD1 Memory Card Drive Firmware Update Utility 1.20/2.02 for Mac OS Download

Posted at December 22, 2024 by PCI-DB Team

Panasonic AU-XPD1 Memory Card Drive Firmware Update Utility 1.20/2.02 for Mac OS Description

The following are improved:

- If AU-XPD1 drive is left un-operated in the state of being connected, the drive letter for it is deleted. (It is unmounted.)
- If a clip is written to a card, the drive starts working incorrectly and its USB link is disconnected.

Updating Procedure:

- Download AU-XPD1 latest firmware update file and put it in any folder in your PC.
- If your PC is connected with two or more AU-XPD1 memory card drives, the update cannot be performed correctly. Be sure to perform the update with only one AU-XPD1 drive connected.
- Disable the standby / hibernate setting of your PC.
- If P2 cards are in the slots of AU-XPD1, take them all out.
- AU-XPD1 require the power supply with USB3.0 or AC Adaptor.
- Double-click the downloaded file to extract it, and the “DVLH1001ZB” folder will appear. So copy this folder to an appropriate location.
- Double-click the “Xpd1UpdateTo202_120.exe” file in the “DVLH1001ZB” folder to start the update. The confirmation dialog for access request will be displayed. So click [OK] to proceed.
- When AU-XPD1 is recognized correctly, following screen is displayed. Please proceed to the next step.
- If the screen is displayed as follows, AU-XPD1 is not recognized. Please check the connection with PC again.
- Click the [Execute] button to start the update.
- It takes about a few minutes to complete the update.
- When the update is completed, the following screen will be displayed as below.
- With these steps, the update will be completed.

About Video Recorder Adapters:

Applying a new firmware package on your Video Recorder adapter should improve overall performance and stability, fix various issues encountered with the device, or add support for newly developed features.

The Video Recorder adapter should be carefully upgraded by a power user (that is to say, someone who has the know-how to successfully complete the process), but it can also be performed by an average user at his or her own risk.

Either way, given the fact that each producer has their own method for installing a new firmware, and that every device has a particular way to enter the update mode, you must not consider upgrading the adapter’s software until you have read and thoroughly understood the installation steps.

As a rule, said steps shouldn’t pose too much of a challenge because manufacturers strive to make them as easy as possible. As with everything else, exceptions do occur, and users should be prepared for them.

Usually, you should transfer the compatible firmware to the Recorder through a USB cable or a memory card, and afterwards enter update mode from the unit’s setup menu or through a specific power-on method.

With this in mind, if you intend to apply this release, make sure the package is compatible with your Video Recorder and that it brings about the changes you want or require; hit the download button and apply the new firmware.

Don’t forget to regularly check with our website so that you don’t miss any updates. 

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Panasonic Drivers