Asrock K7S41GX2 SiS AGP Driver 1.17 Download

Posted at December 31, 2024 by PCI-DB Team

Install Driver Automatically

Device Name	Asrock K7S41GX2 SiS AGP Driver 1.17
Category	Graphics Board
Manufacturer	SIS
File Size	5.3 MB
Supported OS	Windows 2K ,Windows XP

Asrock K7S41GX2 SiS AGP Driver 1.17 Description

CPU
- Socket 462 for AMD Sempron / Athlon / Athlon XP / Duron Processors
- FSB 333/266/200 MHz

Chipset
- Northbridge: SiS 741GX
- Southbridge: SiS 963L

Memory
- 2 x DDR DIMM slots
- Supports DDR 400/333/266 non-ECC, un-buffered memory
- Max. capacity of system memory: 2GB

BIOS
- 2Mb AMI Legal BIOS
- Supports "Plug and Play"
- ACPI 1.1 Compliance Wake Up Events
- SMBIOS 2.3.1 Support

Graphics   
- Integrated Mirage Graphics
- DirectX 7
- Max. shared memory 128MB
- Supports D-Sub with max. resolution up to 2048x1536 @ 75Hz

Audio
- 5.1 CH AC'97 Audio (C-Media CMI9739A Audio Codec)

LAN
- Realtek LAN PHY RTL8201EL
- Speed: 10/100 Ethernet
- Supports Wake-On-LAN

Slots
- 1 x AGP 8X/4X slot
- 1 x AMR slot
- 2 x PCI slots

Connector
- 2 x ATA133 IDE connectors (support 4 x IDE devices)
- 1 x Floppy connector
- 1 x IR header
- CPU/Chassis FAN connector
- 20 pin ATX power connector
- CD in header
- AUX in header
- Front panel audio connector
- 1 x USB 2.0 header (supports 2 USB 2.0 ports)

Rear Panel I/O
- 1 x PS/2 Mouse Port
- 1 x PS/2 Keyboard Port
- 1 x Parallel Port (ECP/EPP Support)
- 1 x Serial Port: COM1
- 1 x VGA Port
- 4 x Ready-to-Use USB 2.0 Ports
- 1 x RJ-45 LAN Port with LED (ACT/LINK LED and SPEED LED)
- Audio Jack: Line in / Front Speaker / Microphone

Unique Feature
- Intelligent Energy Saver
- Instant Boot
- ASRock Instant Flash
- Hybrid Booster:
- CPU Frequency Stepless Control
- ASRock U-COP
- Boot Failure Guard (B.F.G.)

Support CD
- Drivers, Utilities, AntiVirus Software (Trial Version)

Accessories
- Quick Installation Guide, Support CD, I/O Shield
- Floppy/ATA 133 Cables

Hardware Monitor
- CPU Temperature Sensing
- Chassis Temperature Sensing
- CPU Fan Tachometer
- Chassis Fan Tachometer
- Voltage Monitoring: +12V, +5V, +3.3V, Vcore

Form Factor
- Micro ATX Form Factor: 9.6-in x 7.8-in, 24.4 cm x 19.8 cm

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related SIS Drivers