Integra DTR-50.6 A/V Receiver Firmware 1.14 Download

Posted at December 3, 2024 by PCI-DB Team

Integra DTR-50.6 A/V Receiver Firmware 1.14 Description

Changes:

- Improvement of stability when playing back Dolby Atmos contents.

How to upgrade the firmware via USB:

- Turn on the receiver and select the USB input, and wait for the “Now Initializing...” process to complete (35-45 seconds).
- Insert the USB Memory Device containing the software into the front panel USB port of the receiver
- From the front panel press and hold the “USB” input button, followed by the “On/Standby” button. Unit will display “Update <Enter>". Press Enter
- Press the “Enter” button on the front panel to begin the update.
- Do not shut the unit off until “Complete” is shown on the front display
- Once the update has completed check the firmware version to confirm that the unit is fully up to date.
- If it is not, run the update again.

About A/V Receivers Firmware:

Each Audio-Video Receiver (A/V Receiver) is powered by a firmware version that enables all of its features and allows users to make the most of the device. Updating the firmware can bring various changes that should boost performance, such as improved compatibility with different multimedia file formats.

In order to do so, usually, you must transfer the firmware onto an empty USB storage device, connect the flash drive to the A/V Receiver, and initiate the upgrade process from the device's setup menu.

However, this task must be carefully performed in a steady power environment, by someone who has completely read and understood all the installation steps or by a power user (recommended) – an update failure can cause your receiver's software to encounter serious malfunctions.

Therefore, if you think that this release can improve your audio-video receiver in any way, get the desired version through the available download button and apply the new firmware; if not, check with our website as often as possible so that you don't miss the update that might improve your device.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Other Drivers