Nikon 1 S2 Camera Firmware C:1.01 for Mac OS Download

Posted at December 3, 2024 by PCI-DB Team

Nikon 1 S2 Camera Firmware C:1.01 for Mac OS Description

Fixes:

- When Display brightness under Display in the setup menu was set to a negative value, monitor display turned completely white and actual display could not be seen. This issue has been resolved.

How to verify your cameras current firmware version:

- Turn on the camera.
- Press the MENU button to display the menu screen.
- Select the Setup Menu.
- Select Firmware version from the setup menu.
- The camera's C and L firmware versions will be displayed.
- Turn off the camera.

Quick Install Guide:

- Power the camera from AC adapter unit or use a fully charged battery.
- Download the firmware file.
- Run the downloaded file to create a folder called S2Update which contains the S2_0101.bin file.
- Use a card reader or similar device to copy the S2_0101.bin file to the root directory of a memory card formatted in the camera.
- Insert the memory card into the camera's memory card slot and turn on the camera.
- Select Firmware version from the camera's setup menu and follow instructions displayed to upgrade the firmware.
- After the upgrade is complete, turn the camera off and remove the memory card.
- Access the Firmware version item in the camera's setup menu to confirm that the firmware has been upgraded.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Nikon Drivers