SJCAM SJ5000x Limited Edition Action Camera Firmware Download

Posted at December 23, 2024 by PCI-DB Team

SJCAM SJ5000x Limited Edition Action Camera Firmware Description

WARNING:

This firmware is only for the limited edition of the SJ5000x model, produced before October 2015. If you purchased your camera after October 2015, please search for the Elite version of the camera.

To upgrade the firmware properly, follow the steps carefully:

1. Power the camera off.
2. Remove the battery and the MicroSD card from the camera.
3. Reformat the MicroSD card using the FAT32 file format* on your computer.
4. Copy the firmware files into the root directory of your MicroSD card.
5. Reinsert the SD card to your camera.
6. Reinsert the battery.
7. Connect the camera with charger, the camera will be upgraded automatically
8. After the firmware update is completed remove the SD card from the camera and format it again on your computer, make sure to use the FAT32 file format.

About Digital Camera Firmware:

Updating to a newer firmware version than the one already installed on your camera can improve the device’s overall performance and stability, resolve various issues, and add support for newly developed features or enhance existing ones.

On the other hand, downgrading the camera’s firmware can recover its functionality in the unlikely event the currently installed version is faulty or the device’s performance dropped after an upgrade. However, bear in mind that applying an earlier build might not always be possible.

It is recommended that changing the camera’s firmware be performed when the new release resolves an issue that your device has been encountering, or adds a new feature (or enhances an existing one) that could prove useful for you.

This process isn’t intended to be destructive, but still, it’s best to save all your personal data and configurations before applying a different firmware. Moreover, make sure that the battery is fully charged and don’t use the camera’s buttons while the installation is in progress.

When it comes to the update method, usually, you must copy the firmware file onto a compatible memory card, insert it into the camera, and browse from the menu to the device’s update section.

However, each device has various ways to enter the update mode and particular steps that should be taken for a successful upgrade, therefore make sure you read the product’s installation guide.

That being said, if you consider that this firmware improves your device in any way, then hit the download button and get the desired version; if not, check with our website as often as possible so that you don’t miss the update that will boost your camera’s performance. 

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Other Drivers