Kingston SKC100S3B 240GB SSD Firmware Rev.332 Download

Posted at November 21, 2024 by PCI-DB Team

Kingston SKC100S3B 240GB SSD Firmware Rev.332 Description

Part Numbers:

- SKC100S3/120G, SKC100S3B/120G, SKC100S3/120GBK
- SKC100S3/240G, SKC100S3B/240G, SKC100S3/240GBK
- SKC100S3/480G, SKC100S3B/480G, SKC100S3/480GBK

Fixes:

- Fixed a rare condition when waking from slumber mode that might cause the drive to hang. This could result in a B.S.O.D. if the drive is the primary storage boot device.
- Fixed a rarely occurring issue during S3/4 cycling (sleep, hibernate modes) to handle marginal flash timing. This can cause a B.S.O.D. if the drive is the primary storage boot device.
- Fixed an issue during a firmware update where APM would be marked disabled in identify

Known Open Issues for SKC100S3, Firmware Rev. 332:

- Formatting a RAID-1 Volume takes longer than expected with PMC Sierra BR‐8 HBA.
- Some platforms capable of supporting 6Gb SATA Drives from the chipset, but designed 3Gb SATA drives have poor signal integrity which can lead to occasional issues failure to wake from sleep, failure to negotiate at 6Gb speeds and dropped links.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Kingston Drivers