Gigabyte GA-M68MT-D3 (rev. 2.3) Nvidia SATA RAID Preinstall Driver 15.56 for Windows 7 x64 Download
Posted at November 5, 2024 by PCI-DB Team
Install Driver Automatically Device Name | Gigabyte GA-M68MT-D3 (rev. 2.3) Nvidia SATA RAID Preinstall Driver 15.56 for Windows 7 x64 |
---|
Category | Other Drivers Tools |
---|
Manufacturer | NVIDIA |
---|
File Size | 431 KB |
---|
Supported OS | Windows 7 64 bit |
---|
Gigabyte GA-M68MT-D3 (rev. 2.3) Nvidia SATA RAID Preinstall Driver 15.56 for Windows 7 x64 Description
CPU
- Support for AM3 processors: AMD Phenom II processor/ AMD Athlon II processor
Hyper Transport Bus
- 2000 MT/s
Chipset
- NVIDIA GeForce 7025/nForce 630a chipset
Memory
- 2 x 1.5V DDR3 DIMM sockets supporting up to 8GB of system memory (Note 1)
- Dual channel memory architecture
- Support for DDR3 1666(OC)/1333/1066/800 MHz memory modules
Onboard Graphics
Integrated in the Chipset:
- 1 x D-Sub port
Audio
- Realtek ALC888B codec
- High Definition Audio
- 2/4/5.1/7.1-channel (Note 2)
- Support for SPDIF In
- Support for SPDIF Out
- Support for CD In
LAN
- Onboard Realtek RTL8211CL (10/100/1000Mbit)
Expansion Slots
- 1 x PCI Express x16 slot, running at x16
- 1 x PCI Express x1 slot
- 2 x PCI slots
Storage Interface
NVIDIA GeForce 7025/nForce 630a chipset
- 1 x IDE connector supporting ATA-133/100/66/33 and up to 2 IDE devices
- 4x SATA 3Gb/s connectors supporting up to 4 SATA 3Gb/s devices
- Support for RAID 0, RAID 1, RAID 5, RAID 10 and JBOD
iTE IT8720 chip:
- 1 x floppy disk drive connector supporting up to 1 floppy disk drive
USB Chipset:
- Up to 8 USB 2.0/1.1 ports (4 on the back panel, 4 via the USB brackets connected to the internal USB headers)
Internal I/O Connectors
- 1 x 24-pin ATX power connector
- 1 x 4-pin ATX 12V power connector
- 1 x floppy connector
- 1 x IDE connectors
- 4 x SATA 3Gb/s connectors
- 1 x CPU fan header
- 1 x system fan header
- 1 x front panel header
- 1 x front panel audio header
- 1 x CD In connector
- 1 x SPDIF In/Out header
- 2 x USB 2.0/1.1 headers
- 1 x clearing CMOS jumper
Back Panel Connectors
- 1 x PS/2 keyboard port
- 1 x PS/2 mouse port
- 1 x parallel port
- 1 x serial port
- 1 x D-Sub port
- 4 x USB 2.0/1.1 ports
- 1 x RJ-45 port
- 3 x audio jacks (Line In / Line Out / MIC In)
I/O Controller
- iTE IT8720 chip
H/W Monitoring
- System voltage detection
- CPU / System temperature detection
- CPU / System fan speed detection
- CPU / System warning temperature
- CPU / System fan failure warning
- CPU fan speed control (Note 3)
BIOS
- 2 x 8 Mbit flash
- Use of licensed AWARD BIOS
- Support for DualBIOS
- PnP 1.0a, DMI 2.0, SM BIOS 2.4, ACPI 1.0b
Unique Features
- Supports @BIOS
- Supports Q-Flash
- Support for Xpress BIOS Rescue
- Supports Download Center
- Supports Xpress Install
- Supports Xpress Recovery2
- Supports EasyTune(Note 4)
- Support for Auto Green
- Support for On/Off Charge
Bundle Software
- Norton Internet Security (OEM version)
Form Factor
- Micro ATX form factor; 24.4cm x 22.5cm
Note
(Note 1) Due to Windows 32-bit operating system limitation, when more than 4 GB of physical memory is installed, the actual memory size displayed will be less than 4 GB.
(Note 2) To configure 7.1-channel audio, you have to use an HD front panel audio module and enable the multi-channel audio feature through the audio driver.
(Note 3) Whether the CPU fan speed control function is supported will depend on the CPU cooler you install.
(Note 4) Available functions in EasyTune may differ by motherboard model.
Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer. It is highly recommended to always use the most recent driver version available.
Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.
Related NVIDIA Drivers