ASUS SABERTOOTH Z170 MARK 1 ASMedia SATA Driver 3.1.6.0 Download

Posted at April 29, 2024 by PCI-DB Team

ASUS SABERTOOTH Z170 MARK 1 ASMedia SATA Driver 3.1.6.0 Description

Key Features:

- USB 3.1 onboard: One Type-A port plus a reversible Type-C port
- Thermal Armor with Flow Valve – Strengthen your ability. Totally boosted airflow.
- TUF Fortifier - Damage Protection and Improved Cooling
- TUF Detective 2 – system information at your fingertips
- TUF ICe & Thermal Radar 2 – Total cooling system
- Dust Defenders - Repel the Dust, Expand the Lifespan
- TUF Components [TUF 10K Ti-Caps, TUF Alloy Chokes & MOSFETs; Certified by Military-standard]

About SATA / AHCI / RAID Drivers:

When you install an operating system, SATA settings (be it AHCI, RAID, or IDE mode) are detected from the BIOS. If you want to change from one mode to another after the OS has been applied, appropriate drivers are required.

Bear in mind that if you modify these settings without installing proper files first, the operating system will not be able to boot until changes are reverted or required drivers are applied.

To perform the latter task, get the package, run the available setup and follow the instructions displayed on-screen for a complete installation. Afterwards, perform a system reboot so that all changes take effect, enter BIOS menu, and set the SATA option to the mode that best describes the newly applied drivers.

So, if you intend to modify the SATA settings to the mode described by this release, click the download button, and make the desired changes. In addition to that, don’t forget to constantly check with our website so that you don’t miss a single new release.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related ASMedia Drivers