Acer Aspire E5-472G Intel SATA AHCI Driver 13.1.0.1058 for Windows 8.1 64-bit Download

Posted at April 29, 2024 by PCI-DB Team

Acer Aspire E5-472G Intel SATA AHCI Driver 13.1.0.1058 for Windows 8.1 64-bit Description

Specifications:

Operating system:

- Operating system: Windows 8.1

Processor & Chipset:

- Processor Manufacturer: Intel
- Processor form: Core i5
- Processor Type: i5-4210M
- Processor Speed: 2.60 GHz
- Number of processor cores: Dual-core (two cores)

Memory:

- Standard Memory: 4 GB
- Expandable memory: 16 GB
- Memory technology: DDR3L SDRAM
- Memory slots: 2
- Reader: Yes
- Support Memory Card Format: SD

Storage devices:

- HDD capacity: 1 TB
- Disc-type models: DVD burner

Screen display & graphics capabilities:

- Screen Size: 35.6 cm (14 ")
- Display Screen Type: TFT LCD liquid crystal screen
- Type screen resolution: HD
- Backlight Technology: LED
- Resolution: 1366 x 768
- Graphics card manufacturer: NVIDIA
- Graphics card specifications: GeForce 820M
- Discrete graphics memory: Up to 2 GB
- Body type discrete graphics memory: DDR3 VRAM
- Single significant memory storage: Special

Network and Communication:

- Wireless LAN standard: IEEE 802.11b / g / n
- Ethernet Technology: Gigabit Ethernet

Built-in device:

- Webcam: Yes
- Microphone: Yes
- Fingerprint identification device: No

Interface / port:

- HDMI: Yes
- USB 2.0 ports quantity: 3
- USB 3.0 ports quantity: 1
- The total number of USB ports: 4
- VGA: Yes
- Internet connection (RJ-45): Yes

Input devices:

- Pointing device type: TouchPad
- Keyboard: Yes

About SATA / AHCI / RAID Drivers:

When you install an operating system, SATA settings (be it AHCI, RAID, or IDE mode) are detected from the BIOS. If you want to change from one mode to another after the OS has been applied, appropriate drivers are required.

Bear in mind that if you modify these settings without installing proper files first, the operating system will not be able to boot until changes are reverted or required drivers are applied.

To perform the latter task, get the package, run the available setup and follow the instructions displayed on-screen for a complete installation. Afterwards, perform a system reboot so that all changes take effect, enter BIOS menu, and set the SATA option to the mode that best describes the newly applied drivers.

So, if you intend to modify the SATA settings to the mode described by this release, click the download button, and make the desired changes. In addition to that, don’t forget to constantly check with our website so that you don’t miss a single new release.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Intel Drivers