Gigabyte GA-EG41MFT-US2H (rev. 1.4) On/Off Charge Utility B11.1102.1 Download

Posted at December 22, 2024 by PCI-DB Team

Install Driver Automatically

Device Name	Gigabyte GA-EG41MFT-US2H (rev. 1.4) On/Off Charge Utility B11.1102.1
Category	Other Drivers Tools
Manufacturer	GIGABYTE
File Size	1.6 MB
Supported OS	Windows XP ,Windows Vista ,Windows XP 64 bit ,Windows Vista 64 bit ,Windows 7 ,Windows 7 64 bit

Gigabyte GA-EG41MFT-US2H (rev. 1.4) On/Off Charge Utility B11.1102.1 Description

CPU   
- Support for an Intel Core 2 Extreme processor/ Intel Core 2 Quad processor/Intel Core 2 Duo processor/Intel Pentium Dual-Core processo/Intel Celeron processor in the LGA 775 package
- L2 cache varies with CPU

Front Side Bus   
- 1333/1066/800 MHz FSB

Chipset   
- North Bridge: Intel G41 Chipset
- South Bridge: Intel ICH7

Memory   
- 4 x 1.5V DDR3 DIMM sockets supporting up to 8 GB of system memory (Note 1)
- Dual channel memory architecture (Note 2)
- Support for DDR3 1333(OC)/1066/800 MHz memory modules
Because of Intel chipset limitation, please use single-side memory module if four memory modules are to be installed.

Onboard Graphics
North Bridge:
- 1 x D-Sub port
- 1 x DVI-D port (Note 3) (Note 4)
- 1 x HDMI port (Note 4)

Audio   
- Realtek ALC888 codec
- High Definition Audio
- 2/4/5.1/7.1-channel
- Support for S/PDIF In/Out
- Support for CD In

LAN   
- Realtek 8111E chip (10/100/1000 Mbit)

Expansion Slots   
- 1 x PCI Express x16 slot, running at x 16 (Note 4)
- 1 x PCI Express x1 slot
- 2 x PCI slots

Storage Interface
South Bridge:
- 1 x IDE connector supporting ATA-100/66/33 and up to 2 IDE devices
- 4 x SATA 3Gb/s connectors supporting up to 4 SATA 3Gb/s devices

iTE IT8718 chip:
- 1 x floppy disk drive connector supporting up to 1 floppy disk drive

USB   
- Integrated in the South Bridge
- Up to 8 USB 2.0/1.1 ports (4 on the back panel, 4 via the USB brackets connected to the internal USB headers)

IEEE 1394
- T.I. TSB43AB23 chip
- Up to 2 IEEE 1394a ports (1 on the back panel, 1 via the IEEE 1394a bracket connected to the internal IEEE 1394a header)

Internal I/O Connectors   
- 1 x 24-pin ATX main power connector
- 1 x 4-pin ATX 12V power connector
- 1 x floppy disk drive connector
- 1 x IDE connector
- 4 x SATA 3Gb/s connectors
- 1 x CPU fan header
- 1 x system fan header
- 1 x front panel header
- 1 x front panel audio header
- 1 x CD In connector
- 1 x S/PDIF In header
- 1 x S/PDIF Out header
- 2 x USB 2.0/1.1 headers
- 1 x IEEE 1394a header
- 1 x serial port header
- 1 x clearing CMOS jumper

Back Panel Connectors   
- 1 x PS/2 keyboard port
- 1 x PS/2 mouse port
- 1 x D-Sub port
- 1 x DVI-D port (Note 3)(Note 4)
- 1 x HDMI port (Note 4)
- 1 x optical S/PDIF Out connector
- 4 x USB 2.0/1.1 ports
- 1 x IEEE 1394a port
- 1 x RJ-45 port
- 6 x audio jacks (Center/Subwoofer Speaker Out/Rear Speaker Out/Side Speaker Out/Line In/Line out/Microphone)

I/O Controller   
- iTE IT8718 chip

H/W Monitoring   
- System voltage detection
- CPU/System temperature detection
- CPU/System fan speed detection
- CPU overheating warning
- CPU/System fan fail warning
- CPU/System fan speed control (Note 5)

BIOS   
- 2 x 8 Mbit flash
- Use of licensed AWARD BIOS
- Support for DualBIOS
- PnP 1.0a, DMI 2.0, SM BIOS 2.4, ACPI 1.0b

Unique Features   

- Support for @BIOS
- Support for Q-Flash
- Support for Xpress BIOS Rescue
- Support for Download Center
- Support for Xpress Install
- Support for Xpress Recovery2
- Support for EasyTune (Note 6)
- Support for Dynamic Energy Saver Advanced
- Support for Time Repair
- Support for Q-Share

Bundle Software   
- Norton Internet Security (OEM version)

Form Factor   
- Micro ATX Form Factor; 24.4cm x 24.4cm

Notes:

Note 1: Due to Windows Vista/XP 32-bit operating system limitation, when more than 4 GB of physical memory is installed, the actual memory size displayed will be less than 4 GB.

Note 2: Due to a chipset limitation, to avoid the system being unable to start or the memory being incor­rectly detected, if only one memory module is to be installed, we suggest that you install it on the DDR3_1 or DDR3_3 socket; to install two memory modules, we suggest that you install them on the DDR3_1 and DDR3_3 sockets. when all four memory slots are populated with DDR3 1066 MHz modules, the memory speed will drop down to 800 MHz. (Go to GIGABYTE's website for the latest memory support list.)

Note 3: The DVI-D port does not support D-Sub connection by adapter.

Note 4: The PCI Express x16 slot share the PCI Express x16 bus with the HDMI and the DVI-D ports. When the PCI Express x16 slot is in use, the HDMI and the DVI-D ports become unavailable.

Note 5: Whether the CPU/System fan speed control function is supported will depend on the CPU/ System cooler you install.

Note 6: Available functions in EasyTune may differ by motherboard model.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related GIGABYTE Drivers