Barco ClickShare CSC-1 Base Unit Firmware 01.09.03.06 Download

Posted at November 21, 2024 by PCI-DB Team

Barco ClickShare CSC-1 Base Unit Firmware 01.09.03.06 Description

Improvements/bug fixes: 

- Various security improvements.
- Mac OSX 10.12 Sierra compatible.
- Airplay support on iOS10.

Remarks:

- Only active DP to HDMI convertors can be used to support 4K on HDMI
- This release can only be installed on Base Units already running 01.04.00.0574 or higher versions. If the Base Unit has older software installed, the software needs to be updated to v01.04 first before updating to this release.

Known issues

- The Base Unit doesn't wake up from standby when a display is plugged in.
- When doing Airplay video streaming, a lag can build up.
- When using the https wizard, it is advised to reboot if a mistake was made (e.g. wrong password entered once, or wrong certificate chosen) and redo do all actions over again.
- When changing Base unit Wi-Fi IP, there is no message telling to re-pair the Button.
- The Base Unit cannot communicate with a Polycom device if that device has a telnet password set.
- Sometimes the Button update via USB doesn't start. If this happens, unplug the Button and try again.
- While switching from https to http, the web interface/RESTAPI doesn't get redirected.
- The screen saver isn't activated any more after pairing a Button. Rebooting the Base Unit after pairing a Button is advised.
- On Safari browsers https can only be enabled by generating the self-signed certificates and not by uploading the certificates.

UPDATE THE BASE UNIT:

There are 2 ways to update the Base Unit : via USB stick or via Wi-Fi
- Download new software and extract the zip file
- Rename the ipk or nad file to clickshare_firmware.ipk or clickshare_firmware.nad and copy it onto the USB stick
- Plug the USB stick into the front USB port of the Base unit
- Verifying Update Package...
- Installing Update Package...
- After software update has completed, the Base Unit will shut down (CSC) or reboot (CSM)
- To restart press the standby button at the front of the Base Unit

About Device Firmware:

Applying a newer firmware version than the one already installed on your unit can bring various enhancements, include workarounds for diverse problems encountered by the device, and improve or add newly developed features.

On the other hand, downgrading the firmware version can recover the device’s functionality in the event of a software update either turning up faulty or causing the unit’s overall performance to drop. However, bear in mind that applying an older firmware isn’t recommended and might not always be possible.

When it comes to the update steps, due to the large variety of devices and numerous ways for installing a new firmware, it is recommended that you carefully read and understand the upgrade steps, and consider applying a different firmware only when you have familiarized yourself with the update method.

As the installation process is most of the times quite risky, this step should be taken by users that have the ability to successfully complete the update; regular users may initiate it at their own risk. Moreover, it’s best that this task be performed in a steady power environment such as the one ensured by a UPS unit.

Therefore, if you consider applying this release, hit the download button, take into account all the aforementioned aspects, and update the device’s firmware. Also make sure you constantly check with our website to ensure that you don’t miss a single new release.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Other Drivers