PCI-DB.com
  1. Driver
  2. Hdd Ssd Nas Usb Flash
  3. Buffalo TS5400D NAS Firmware 2.60

Buffalo TS5400D NAS Firmware 2.60 Download

Posted at November 23, 2024 by PCI-DB Team

Install Driver Automatically
Device NameBuffalo TS5400D NAS Firmware 2.60
CategoryHdd Ssd Nas Usb Flash
ManufacturerBuffalo
File Size438.7 MB
Supported OSWindows 2K ,Windows XP ,Windows 2003 ,Windows Vista ,Windows XP 64 bit ,Windows 2008 ,Windows Vista 64 bit ,Windows 7 ,Windows 7 64 bit ,Windows 8 ,Wi

Buffalo TS5400D NAS Firmware 2.60 Description

New and Modified Features:

[WebAccess Remote and Amazon S3]

- The maximum number of files that can be copied to the remote folder at once is expanded from 10,000 to 100,000.
- Additional network errors with Amazon S3 are now displayed.

[Backup]

- You can now specify how many normal backups to keep.
- The folder for backup logs is now configurable.
- When creating backup jobs, the LAN port numbers (LAN1 or LAN2) of source and target TeraStations are now shown.
- Error codes are now displayed when backup jobs fail.

[Replication]

- When configuring replication, the LAN port numbers (LAN1 or LAN2) of source and target TeraStations are now shown.

[Update]

- Added scheduled firmware updates.
- Added automatic firmware update (when new firmware is detected).

[System]

- CPU and memory utilization is now displayed.

[Drives]

- S.M.A.R.T is now supported for the TeraStation's internal drives.

[Network]

- IP address, subnet mask, default gateway, and DNS servers can now be configured from the same settings page.

Bug Fixes:

[UPS]

- Fixed a bug where blackout was falsely detected when the self test was run on Schneider Electric (APC) UPSs.

[Network]

- Fixed a bug where backup failed with the Ethernet frame size configured to 9216 bytes on 5000 series TeraStations. Now, Ethernet frame sizes of 1500, 4084, 7404, and 9216 bytes are supported.

[Users]

- Fixed a bug where a user's primary group was not changed when the user joined a new group.

[Update]

- Fixed a bug where the wrong error was displayed when the network was disconnected during a firmware update.
- Fixed a bug where the guest account was enabled after the firmware was updated from version 2.50.

[Amazon S3]

- Fixed a bug where folders on the TeraStation could not copied to the Amazon S3 remote folder after recovering from network disconnection.

[RAID]

- Fixed a bug where I17 kept displaying after resync and rebuild were completed when the TeraStation was in degraded mode because drives had been dismounted during resync.

[Email Notification]

- Fixed a bug where the wrong body text was included in the notification email for changing the RAID mode from RAID 1 to RAID 5 with RMM enabled.
- Fixed a bug where the date in the sent email header was blank.
- Fixed a bug where the source backup folder's name was not logged when the backup completed if the folder name contained a single-byte space.

[Replication]

- Fixed a bug where replication failed if any file handling were operated to the replication source target more than 8 hours.
- Fixed a bug where replication failed if a shared folder which contains a single-byte space in its folder name was configured as a replication source folder.
- Fixed a bug where replication could not be configured if the replication target folder had a multi-byte space in its name.
- Fixed a bug where a replication error message was still displayed after the replication task was deleted.

[Drives]

- Fixed a bug where a formatted media cartridge showed "Unformatted" if it was inserted while the TeraStation was off.

[File Sharing]

- Fixed a bug where access restrictions were disabled for a folder when all users with access privileges to the folder were deleted.
- Fixed a bug where the dialogue that a shared folder was created was not displayed with IE 8.
- Fixed a bug where extra folders were created when recovering settings from a USB device if the shared folder's description contained a single-byte space.

[Direct Copy]

- Fixed a bug where Direct Copy could be enabled for a folder with a blank folder name.




  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Buffalo Drivers

Buffalo WS5400DN2 WSS Firmware 2.90

Device Type: Hdd Ssd Nas Usb Flash File Size: 6.7 MB Windows Server 2012

Install Driver

Buffalo WS5200DN2 WSS Firmware 2.90

Device Type: Hdd Ssd Nas Usb Flash File Size: 6.7 MB Windows Server 2012

Install Driver

Buffalo LS510D NAS Firmware 4.30

Device Type: Hdd Ssd Nas Usb Flash File Size: 129.7 MB Windows 7 ,Windows 7 64 bit ,Windows 8 ,Windows 8 64 bit ,Windows 8.1 ,Windows 8.1 64 bit ,Windows 10 ,Windows 10 64 bit ,Windows Mac

Install Driver

Buffalo WS5600DR2 WSS Firmware 2.90

Device Type: Hdd Ssd Nas Usb Flash File Size: 6.7 MB Windows Server 2012

Install Driver

Buffalo WS5400RN2 WSS Firmware 2.90

Device Type: Hdd Ssd Nas Usb Flash File Size: 6.7 MB Windows Server 2012

Install Driver

Buffalo WS5600DN2 WSS Firmware 2.90

Device Type: Hdd Ssd Nas Usb Flash File Size: 6.7 MB Windows Server 2012

Install Driver

Buffalo TS-8VHL/R6 NAS Firmware Update 1.15

Device Type: Hdd Ssd Nas Usb Flash File Size: 383.5 MB Windows 2K ,Windows XP ,Windows Vista ,Windows Vista 64 bit ,Windows 7 ,Windows 7 64 bit ,Windows 8 ,Windows 8 64 bit

Install Driver

Buffalo LS520D NAS Firmware 4.30

Device Type: Hdd Ssd Nas Usb Flash File Size: 129.7 MB Windows 7 ,Windows 7 64 bit ,Windows 8 ,Windows 8 64 bit ,Windows 8.1 ,Windows 8.1 64 bit ,Windows 10 ,Windows 10 64 bit ,Windows Mac

Install Driver

Buffalo LS520DE NAS Firmware 4.30

Device Type: Hdd Ssd Nas Usb Flash File Size: 129.7 MB Windows 7 ,Windows 7 64 bit ,Windows 8 ,Windows 8 64 bit ,Windows 8.1 ,Windows 8.1 64 bit ,Windows 10 ,Windows 10 64 bit ,Windows Mac

Install Driver

Find Missing Drivers

© 2024 PCI-DB.com - PCI Database Replacement. All rights reserved.