SJCAM SJ4000 Plus Action Camera Firmware 3.2 Download

Posted at November 2, 2024 by PCI-DB Team

SJCAM SJ4000 Plus Action Camera Firmware 3.2 Description

Fixes:

- Available to make future firmware updates through the APP.

To upgrade the firmware properly, follow the steps carefully:

Step 1: Please check your current firmware version in the camera settings screen. If your current firmware is v.2.4 or lower, please follow start with step 2, if your current firmware is v.2.5 or newer, please jump to step 3.

Step 2: Installing Loader Software:
a) Make sure to reformat the MicroSD card. Note: reformatting is a Must.
b) Drag and Drop software “LD96660A.bin” into the root folder of MicroSD card.
c) Insert microSD card into the SJ4000+ unit and power the camera on. Note: makes sure the camera is off when inserting the card. Once the camera is powered on, turn the SJ4000+ off and remove the card.

Step 3: Installing the firmware:
d) Delete software LD96660A.bin from the MicroSD card. Next, copy v3.1 firmware “SJCAM001.bin” into the root of the microSD. Note: there is no need to root the card again for Step d.
e) Re-insert the MicroSD into the powered off SJ4000+ and power the unit on. It may take 10-15 seconds for the firmware to install. The blue and yellow light will blink until the firmware is installed and then the unit will power on. Check the firmware version to confirm version has successfully been updated then delete file SJCAM001.bin from card otherwise the firmware will re-install upon re-powering the unit on.

About Digital Camera Firmware:

Updating to a newer firmware version than the one already installed on your camera can improve the device’s overall performance and stability, resolve various issues, and add support for newly developed features or enhance existing ones.

On the other hand, downgrading the camera’s firmware can recover its functionality in the unlikely event the currently installed version is faulty or the device’s performance dropped after an upgrade. However, bear in mind that applying an earlier build might not always be possible.

It is recommended that changing the camera’s firmware be performed when the new release resolves an issue that your device has been encountering, or adds a new feature (or enhances an existing one) that could prove useful for you.

This process isn’t intended to be destructive, but still, it’s best to save all your personal data and configurations before applying a different firmware. Moreover, make sure that the battery is fully charged and don’t use the camera’s buttons while the installation is in progress.

When it comes to the update method, usually, you must copy the firmware file onto a compatible memory card, insert it into the camera, and browse from the menu to the device’s update section.

However, each device has various ways to enter the update mode and particular steps that should be taken for a successful upgrade, therefore make sure you read the product’s installation guide.

That being said, if you consider that this firmware improves your device in any way, then hit the download button and get the desired version; if not, check with our website as often as possible so that you don’t miss the update that will boost your camera’s performance. 

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Other Drivers