HP Color LaserJet CM4730/CM3530 MFP Firmware Upgrade Utility 50.292.1 Download

Posted at December 22, 2024 by PCI-DB Team

HP Color LaserJet CM4730/CM3530 MFP Firmware Upgrade Utility 50.292.1 Description

Changes:

- Invalid authentication attempt now introduces a delay following unsuccessful authentication attempts when accessing stored jobs that are protected with PIN.
- The Default PIN option is made available for PIN Printing in UPD for Non-SEP devices.
- When installing SecureJet 7.0.5 with OXPd 1.6 enabled, the device will either crash with a 49.4c02 or the solution uninstalls itself.
- Custom status message set through HPAC, does not interleave with "Paused" message when device is paused.
- 49. DFFF error is seen when printing certain PDF files that contain non-English characters (e.g.: French, Italian, or German).
- When printing certain PDF files, user may experience "1200 DPI banner job not printed" error on the control panel screen, missing data and delay in between pages.
- Color Restriction doesn’t work when set via EWS in Russian Language.
- Missing characters in the Embedded JetDirect Configuration page when using Korean language.
- Intermittently hostname changes to NPIxxxx and is also set to 'Read only'.
- 49.5F11 error seen when printing from Mac OS 10.7, 10.8 and 10.9 using InDesign CS6 application.
- Unable to set the DNS value within WJA. In this case the IP address would work however there would be no load balancing for multiple time servers.
- Device hangs when printing mixed A4/A5 jobs.
- Device crashes when using the hard reset key to stop scan.
- Send to Email failure with Office365.
- Scan to Email over SSL fails when using Gmail SMTP server.
- Device can encounter a 49.FF09 error during a Nessus vulnerability scan.
- Device can encounter a 49.FF04 error during a Nessus vulnerability scan.
- Telnet connectivity to device may be unavailable after a Nessus vulnerability scan.
- This firmware addresses the following security issue: CVE-2014-0224 - SSL/TLS MITM vulnerability

About Printer and Scanner Firmware:

Before you even consider installing this firmware, go to the system information page of the device and make sure that the version currently installed on it isn’t newer or matching this one.

If you upgrade to this build, imaging devices can get printing and scanning quality improvements, new options added to the setup menu, feature enhancements, various fixes, as well as several other changes that can boost stability.

Considering the large number of devices and manufacturers, as well as the wide variety of methods for upgrading imaging units, we recommend that you read the installation steps and initiate a firmware update process only when you have familiarized yourself with the procedure.

In addition to that, it would be best if you perform this task in a steady power environment such as the one ensured by a UPS unit. Also, make sure you don’t power off the imaging device or use its buttons during the installation, in order to avoid any malfunctions.

Therefore, if you intend to apply this version, click the download button, and install the package. Remember to check with our website as often as possible so that you don’t miss a single new release.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related HP Drivers