ECS A960M-M2 (V1.0) ATI Display Driver 8.710 Download
Posted at November 2, 2024 by PCI-DB Team
Install Driver Automatically| Device Name | ECS A960M-M2 (V1.0) ATI Display Driver 8.710 |
|---|
| Category | Graphics Board |
|---|
| Manufacturer | ATI |
|---|
| File Size | 161 MB |
|---|
| Supported OS | Windows XP ,Windows Vista ,Windows XP 64 bit ,Windows Vista 64 bit ,Windows 7 ,Windows 7 64 bit |
|---|
ECS A960M-M2 (V1.0) ATI Display Driver 8.710 Description
CPU
- Supports AMD AM3+ FX/Phenom II/Athlon II/Sempron 100 Series
- Support 125W AM3+ FX/ Phenom II X6 processors
- High-performance HyperTransport 3.0 CPU Interface
- Note: This board supports CPU up to 125W TDP ; you can refer to AMD website to check your CPU.
CHIPSET
- AMD 760G & AMD SB710
- North Bridge: AMD 760G
- South Bridge: AMD SB710
GRAPHICS
- On chip (AMD 760G-based with ATI Radeon HD3000 graphics)
- Integrated DirectX 10 graphics processor
- Share Memory: Maximum up to 512MB
MEMORY
- Dual-channel DDR3 memory architecture
- 2 x 240-pin DDR3 DIMM socket support up to 16 GB*
- Supports Dual-DDR3 up to 1866 with AM3+ CPU
- Supports Dual-DDR3 1333 / 1066 with AM3 CPU
- *(Due to AMD CPU spec limitation, please refer to Memory QVL for more information)
- *(Due to the DRAM maximum size is 4GB at present, the memory maximum size we have tested is 8GB)
Due to the operating system limitation, the actual memory size may be less than 4GB for the reservation for system usage under Windows 32-bit OS.
For Windows 64-bit OS with 64-bit CPU, there is no such limitation
EXPANSION SLOT
- 1 x PCI Express x16 Gen2.0 slot
- 1 x PCI Express x1 slot
- 2 x PCI slots
STORAGE
- Support by AMD SB710
• RAID0, RAID1, RAID10 configuration
• 6 x Serial ATA 3.0Gb/s devices
AUDIO
- VIA VT1705 6-channel audio CODEC
- Compliant with HD audio specification
LAN
- Realtek 8111E Gigabit LAN Fast Ethernet Controller
- Realtek 8105E 10/100 Lan(Optional)
REAR PANEL I/O
- 1 x PS/2 keyboard & PS/2 mouse connectors
- 1 x HDMI Port(Optional)
- 1 x DVI connector(optional)
- 1 x D-sub(VGA)
- 1 x Serial port (COM1)
- 1 x RJ45 LAN connector
- 1 x Audio port (Line-in, Line-out, Mic-in)
- 4 x USB 2.0 Ports
INTERNAL I/O CONNECTORS & HEADERS
- 1 x 24-pin ATX Power Supply connector
- 1 x 8-pin ATX 12V Power Connector
- 1 x 4pin CPU_FAN connectors
- 1 x 3-pin SYS_FAN connector
- 1 x IDE connector
- 1 x Speaker header
- 1 x Front panel switch/LED header
- 1 x Front panel audio header
- 1 x SPDIF out header
- 1 x Clear CMOS header
- 1x CD in header
- 1 x Parallel Header
- 6 x Serial ATA 3Gb/s connectors
- 1 x Chassis intrusion header
- 2 x USB 2.0 headers support additional 4 USB 2.0 Ports
SYSTEM BIOS
- AMI BIOS with 8Mb SPI Flash ROM
- Supports Plug and Play, STR (S3) / STD (S4) , Hardware monitor, Multi Boot
- Audio, LAN, can be disabled in BIOS
- F11 hot key for boot up devices option
- Support over-clocking
- Support eJIFFY
- Support eBLU
- Support eDLU
- Support eOC
- Support ECS M.I.B III Utility
- CPU voltage adjustable
- Memory voltage adjustable
• NB Chipset Voltage Adjustable
• SB Chipset Voltage Adjustable
• HT Voltage Adjustable
• External Clock Adjustable
• Multiple Frequency Adjustable
Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer. It is highly recommended to always use the most recent driver version available.
Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.
Related ATI Drivers