MSI 970A-G46 Realtek HD Audio Driver 5.10.0.6521/ 6.0.1.6521 for XP/ Vista, Windows 7 Download

Posted at December 22, 2024 by PCI-DB Team

MSI 970A-G46 Realtek HD Audio Driver 5.10.0.6521/ 6.0.1.6521 for XP/ Vista, Windows 7 Description

Specifications:

CPU
• 64bit AMD FX, Phenom II X6/X4/X3/X2 and Sempron CPU in AM3 / AM3+ package.

Hyper Transport Bus
• HyperTransport 3.0 supporting speed up to 4.8GT/s

Chipset
• AMD 970 and SB950 Chipset

Main Memory
• Supports four unbuffered DIMM of 1.5 Volt DDR3 800/1066/1333/1600/1866/2133* (OC) DRAM, 32GB Max
 
Slots
• 2 PCI Express 2.0 x16 slots
• 2 PCI Express 2.0 x1 slots
• 2 PCI slots, support 3.3V/ 5V PCI bus Interface.
 
On-Board SATA
• 6 SATA III (1~6) ports by AMD SB950
- Supports storage and data transfers at up to 6Gb/s

RAID Function
- SATA III 1~6 support RAID 0, 1, 5, 10 mode by AMD SB950
• The RAID setup floppy disk is optional depending on the districts. You can download the files from the website to make the setup disk.

USB 3.0
• 2 USB 3.0 ports by Asmedia ASM1042
 
Audio
• Chipset integrated by Realtek ALC892
- True Blu-ray Audio Support
- Flexible 8-channel audio with jack sensing
- Compliant with Azalia 1.0 Spec
 
LAN
• Realtek PCI-E GbLAN controller 8111E
- Integrated Fast Ethernet MAC and PHY in single chip
- Supports 10Mb/s, 100Mb/s and 1000Mb/s
- Compliance with PCI-Express Bus specification v1.0a
 
Internal I/O Connectors
- 1 x ATX 24-pin power connector
- 1 x ATX 8-pin 12V CPU power connector
- CPU x 1 / System x 2 FAN connectors
- 1 x Front panel audio connector
- 1 x Front panel connector
- 1 x Chassis intrusion switch connector
- 3 x USB 2.0 connectors
- 6 x Serial ATA III connectors
- 1 x Clear CMOS jumper
- 1 x SPDIF-out connector
- 1 x TPM module connector
 
Back Panel I/O Ports
- 1 x Optical SPDIF-out
- 1 x PS/2 Keyboard/Mouse port
- 1 x Serial port
- 6 x USB 2.0 ports
- 2 x USB 3.0 ports (blue)
- 1 x RJ45 LAN jack
- 1 x 6 in 1 audio jack
 
Dimension
• 30.5cm(L) x 22.5cm(W) ATX Form Factor
Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related REALTEK Drivers