ASUS Rampage IV Extreme Intel LAN Driver 18.5.54.0 for Windows 8.1 Download

Posted at December 22, 2024 by PCI-DB Team

ASUS Rampage IV Extreme Intel LAN Driver 18.5.54.0 for Windows 8.1 Description

Specifications:

CPU:
- Intel Socket 2011 for 2nd Generation Core i7 Processors
- Supports Intel Turbo Boost Technology 2

Chipset:

- Intel X79

Memory:

- 8 x DIMM, Max. 64GB, DDR3 2400(O.C.)/2133(O.C.)/1866/1600/1333/1066 MHz Non-ECC, Un-buffered Memory
- Quad Channel Memory Architecture
- Supports Intel Extreme Memory Profile (XMP)
- Hyper DIMM support is subject to the physical characteristics of individual CPUs.

Multi-GPU Support:

- Supports NVIDIA 4-Way SLI Technology
- Supports AMD 4-Way CrossFireX Technology

Expansion Slots:

- 4 x PCIe 3.0/2.0 x16 (x16 or dual x16 or x16/x8/x16 or x16/x8/x8/x8, red)
- 1 x PCIe 3.0/2.0 x16 (x8 mode, gray)
- 1 x PCIe 2.0 x1

Storage:

- 2 x SATA 6Gb/s port(s), red
- 4 x SATA 3Gb/s port(s), black
- Support Raid 0, 1, 5, 10
- 2 x eSATA 6Gb/s port(s), red
- 2 x SATA 6Gb/s port(s), red

LAN:

- Intel, 1 x Gigabit LAN Controller(s)

Bluetooth:

- Bluetooth V2.1+EDR

Audio:

- Realtek ALC898 7.1-Channel High Definition Audio CODEC
- Supports : Jack-detection, Multi-streaming, Front Panel Jack-retasking
- Blu-ray audio layer Content Protection
- Optical S/PDIF out port(s) at back panel

USB Ports:

- 8 x USB 3.0 port(s) (4 at back panel, blue, 4 at mid-board)
- 12 x USB 2.0 port(s) (8 at back panel, black+red, 4 at mid-board)

Back I/O Ports:

- 1 x PS/2 keyboard/mouse combo port(s)
- 1 x Bluetooth module(s)
- 2 x eSATA 6Gb/s
- 1 x LAN (RJ45) port(s)
- 4 x USB 3.0
- 8 x USB 2.0 (one port can be switched to ROG Connect)
- 1 x Optical S/PDIF out
- 5 x Audio jack(s)
- 1 x Clear CMOS button(s)
- 1 x ROG Connect On/ Off switch(es)

Internal I/O Ports:

- 2 x USB 3.0 connector(s) support(s) additional 4 USB 3.0 port(s)
- 2 x USB 2.0 connector(s) support(s) additional 4 USB 2.0 port(s)
- 4 x SATA 6Gb/s connector(s)
- 4 x SATA 3Gb/s connector(s)
- 2 x CPU Fan connector(s)
- 3 x Chassis Fan connector(s)
- 3 x Optional Fan connector(s)
- 1 x S/PDIF out header(s)
- 1 x 24-pin EATX Power connector(s)
- 1 x 8-pin ATX 12V Power connector(s)
- 1 x 4-pin ATX 12V Power connector(s)
- 1 x Front panel audio connector(s) (AAFP)
- 1 x System panel(s)
- 1 x OC Key header(s)
- 1 x OT header(s)
- 2 x Subzero Sense connector(s)
- 1 x Slow Mode switch(es)
- 7 x ProbeIt Measurement Points
- 3 x Thermal sensor connector(s)
- 1 x LN2 Mode header(s)
- 1 x Q Reset switch(es)
- 2 x EZ Plug connector(s) (4-pin in white for memory DIMMs; 6-pin in black for PCIe slots)
- 1 x Power-on button(s)
- 1 x Reset button(s)
- 1 x Go Button(s)
- 1 x BIOS Switch button(s)

Form Factor:

- Extended ATX Form Factor
- 12 inch x 10.7 inch ( 30.5 cm x 27.2 cm )

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related INTEL Drivers