PCI-DB.com
  1. Driver
  2. Motherboard
  3. Gigabyte GA-P41T-D3P (rev. 1.4) Intel Chipset Driver 9.1.2.1007

Gigabyte GA-P41T-D3P (rev. 1.4) Intel Chipset Driver 9.1.2.1007 Download

Posted at December 22, 2024 by PCI-DB Team

Install Driver Automatically
Device NameGigabyte GA-P41T-D3P (rev. 1.4) Intel Chipset Driver 9.1.2.1007
CategoryMotherboard
ManufacturerIntel
File Size1.2 MB
Supported OSWindows XP ,Windows Vista ,Windows XP 64 bit ,Windows Vista 64 bit ,Windows 7 ,Windows 7 64 bit

Gigabyte GA-P41T-D3P (rev. 1.4) Intel Chipset Driver 9.1.2.1007 Description

CPU   
- Support for an Intel Core 2 Extreme processor/ Intel Core 2 Quad processor/Intel Core 2 Duo processor/ Intel Pentium processor/Intel Celeron processor in the LGA775 package
- L2 cache varies with CPU

Front Side Bus   
- 1333/1066/800 MHz FSB

Chipset   
- North Bridge: Intel G41 Express Chipset
- South Bridge: Intel ICH7

Memory   
- 2 x 1.5V DDR3 DIMM sockets supporting up to 4 GB of system memory
* Due to standard PC architecture, a certain amount of memory is reserved for system usage, the actual memory size displayed will be less than 4 GB.
- Dual channel memory architecture
- Support for DDR3 1333(O.C.)/1066/800 MHz memory modules
- Support for non-ECC memory modules

Audio
- Realtek HD audio codec
- High Definition Audio
- 2/4/5.1/7.1-channel
* To configure 7.1-channel audio, you need connect with the port of HD Audio standard via front panel and enable the multi-channel audio feature through the audio driver.
- Support for S/PDIF Out
- Support for CD In

LAN   
- 1 x Realtek GbE LAN chip (10/100/1000 Mbit)

Expansion Slots   
- 1 x PCI Express x16 slot, running at x16
- 3 x PCI Express x1 slots
- 3 x PCI slots

Storage Interface
South Bridge:
- 1 x IDE connector supporting ATA-100/66/33 and up to 2 IDE devices
- 4 x SATA 3Gb/s connectors supporting up to 4 SATA 3Gb/s devices

iTE 8720 chip:
- 1 x floppy disk drive connector supporting up to 1 floppy disk drive

USB   
South Bridge:
- Up to 8 USB 2.0/1.1 ports (4 on the back panel, 4 via the USB brackets connected to the internal USB headers)

Internal I/O Connectors   
- 1 x 24-pin ATX main power connector
- 1 x 4-pin ATX 12V power connector
- 1 x floppy disk drive connector
- 1 x IDE connector
- 4 x SATA 3Gb/s connectors
- 1 x CPU fan header
- 2 x system fan headers
- 1 x power fan header
- 1 x front panel header
- 1 x front panel audio header
- 1 x CD In connector
- 1 x S/PDIF Out header
- 2 x USB 2.0/1.1 headers
- 1 x clearing CMOS jumper

Back Panel Connectors   
- 1 x PS/2 keyboard port
- 1 x PS/2 mouse port
- 1 x parallel port
- 1 x serial port
- 1 x coaxial S/PDIF Out connector
- 4 x USB 2.0/1.1 ports
- 1 x RJ-45 port
- 3 x audio jacks (Line In/Line Out/Microphone)

I/O Controller   
- iTE IT8720

H/W Monitoring   
- System voltage detection
- CPU/System temperature detection
- CPU/System/Power fan speed detection
- CPU overheating warning
- CPU/System/Power fan fail warning
- CPU fan speed control
* Whether the CPU fan speed control function is supported will depend on the CPU cooler you install.

BIOS   
- 2 x 8 Mbit flash
- Use of licensed AWARD BIOS
- Support for DualBIOS
- PnP 1.0a, DMI 2.0, SM BIOS 2.4, ACPI 1.0b

Unique Features   
- Support for @BIOS
- Support for Q-Flash
- Support for Xpress BIOS Rescue
- Support for Download Center
- Support for Xpress Install
- Support for Xpress Recovery2
- Support for EasyTune
* Available functions in EasyTune may differ by motherboard model.
- Support for Easy Energy Saver
* Due to the hardware limitation, you must install the IntelCore 2 Extreme/ Core 2 Quad/ Core 2 Duo/Pentium Dual-Core/Celeron Dual-Core/ Celeron 400 Series CPU to enable support for Easy Energy Saver.
- Support for Smart Recovery
- Support for ON/OFF Charge
- Support for Q-Share

Bundle Software   
- Norton Internet Security (OEM version)

Form Factor   
- ATX Form Factor; 30.5cm x 19.4cm
Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Intel Drivers

Find Missing Drivers

© 2024 PCI-DB.com - PCI Database Replacement. All rights reserved.