Gigabyte GA-G41MT-S2PT (rev. 2.0) Realtek LAN Driver 7.046 for Windows 7 Download

Posted at December 22, 2024 by PCI-DB Team

Gigabyte GA-G41MT-S2PT (rev. 2.0) Realtek LAN Driver 7.046 for Windows 7 Description

Specifications:

CPU:

- Support for an Intel Core 2 Extreme processor/Intel Core 2 Quad processor/Intel Core 2 Duo processor/Intel Pentium processor/Intel Celeron processor in the LGA775 package
- L2 cache varies with CPU

Front Side Bus:

- 1333/1066/800 MHz FSB

Chipset:

- North Bridge: Intel G41 Express Chipset
- South Bridge: Intel ICH7

Memory:

- 2 x 1.5V DDR3 DIMM sockets supporting up to 8 GB of system memory
- Dual channel memory architecture
- Support for DDR3 1333 (O.C.)/1066/800 MHz memory modules

Onboard Graphics:

- 1 x D-Sub port

Audio:

- VIA audio codec
- High Definition Audio
- 2/4/5.1/7.1-channel

LAN:

- 1 x Realtek RTL8111E chip (10/100/1000 Mbit)

Expansion Slots:

- 1 x PCI Express x16 slot, running at x16
- 1 x PCI Express x1 slot
- 2 x PCI slots

Storage Interface:

- 1 x IDE connector supporting ATA-100/66/33 and up to 2 IDE devices
- 4 x SATA 3Gb/s connectors supporting up to 4 SATA 3Gb/s devices

USB:

- Up to 8 USB 2.0/1.1 ports (4 ports on the back panel, 4 ports available through the internal USB headers)

Internal I/O Connectors:

- 1 x 24-pin ATX main power connector
- 1 x 4-pin ATX 12V power connector
- 1 x IDE connector
- 4 x SATA 3Gb/s connectors
- 1 x CPU fan header
- 1 x system fan header
- 1 x front panel header
- 1 x front panel audio header
- 2 x USB 2.0/1.1 headers
- 1 x clearing CMOS jumper

Back Panel Connectors:

- 1 x PS/2 keyboard port
- 1 x PS/2 mouse port
- 1 x parallel port
- 1 x serial port
- 1 x D-Sub port
- 4 x USB 2.0/1.1 ports
- 1 x RJ-45 port
- 3 x audio jacks (Line In/Line Out/Microphone)

I/O Controller:

- iTE IT8720/IT8718 chip

H/W Monitoring:

- System voltage detection
- CPU temperature detection
- CPU/System fan speed detection
- CPU overheating warning
- CPU/System fan fail warning
- CPU fan speed control

Form Factor:

- Micro ATX Form Factor; 24.4cm x 19.4cm
Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related REALTEK Drivers