ASRock SBC-310 Intel Graphics Driver 15.36.2.64.3871 64-bit Download

Posted at November 2, 2024 by PCI-DB Team

ASRock SBC-310 Intel Graphics Driver 15.36.2.64.3871 64-bit Description

Specifications:

Form Factor:
- Dimensions: 3.5" SBC (5.8-in x 4.0-in)/ ( 146 x 102 mm)

Processor System:

- CPU: BGA type for Intel Core i5-4300/Celeron 2980U mobile, processor (Haswell ULT MCP )Default 2980U Dual core MCP

Expansion Slot:

- PCI: 0
- Mini-PCIe: 1 (Half Size) + 1 (Full Size ) shared with mSATA
- mSATA: 1 (Full Size ) shared with SATA2
- PCIe: 0
- CFast Card Socket: 0

Memory:

- Technology: Single Channel DDR3L 1333/1600 MHz SDRAM
- Max.: 8GB
- Socket: 1 x SO-DIMM

Graphics:

- Controller: Intel HD Graphics (By CPU)
- VRAM: Shared Memory
- VGA: 0
- LVDS: 1 co-lay with eDP
- HDMI: Supports HDMI 1.4a, supported with Level Shift, resolution up to 4096x2304 (1x HDMI)
- DVI: 0
- DisplayPort: 0
- MultiDisplay: Yes(Three Display)

Ethernet:

- Ethernet: 10/100/1000 Mbps
- Controller: GbE LAN1: RTL8111G , LAN2: Intel I218LM (4300U SKU), GbE LAN1: RTL8111G , LAN2: Intel I218V (2980U SKU)
- Connector: 2 x RJ 45

SATA:

- Max Data Transfer Rate: SATA3 (6.0Gb/S)

Rear I/O:

- VGA: 0
- DVI: 0
- HDMI: 2
- DisplayPort: 0
- Ethernet: 2
- USB: 4 x USB 3.0
- Audio: 0
- Serial: 0
- eSATA: 0
- PS2: 0

Internal Connector:

- USB: 4 (2 x USB Header 2.54mm pitch)
- LVDS / inverter: 24 bit dual channel LVDS co-lay with eDP
- VGA: 0
- Serial: 4 ( 2 RS-232/422/485, 2 RS-232)
- SATA: 2 x SATA3 (6.0Gb/s)
- mPCIe: 1
- Parallel: 0
- mSATA: 1(shared)
- IrDA: 0
- GPIO 8-bit: 4 x GPI + 4 x GPO
- SATA PWR Output Con: 1
- Speaker Header: 1

Watchdog Timer:

- Output: Output from super I/O to drag RESETCON
- Interval: 256 Segments, 0,1,2…255 Sec/Min

Power Requirements:

- Input PWR: DC 9-36 input
- Power On: AT/ATX Supported AT : Directly PWR on as power input ready, ATX : Press button to PWR on after power input ready

Environment:

- Temperature: 0ºC – 60ºC

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related INTEL Drivers