FiiO X3 Mark III Portable Player Firmware 1.1.4 Download

Posted at February 2, 2025 by PCI-DB Team

FiiO X3 Mark III Portable Player Firmware 1.1.4 Description

The following changes and improvements have been made to the firmware FW1.1.4 compared to the FW1.0.3.

1. Added Gapless playback function (can be enabled in "Play settings->Playback gap");
2. Fixed issue where the beginning of the track might be cut when switching songs or playing right after starting up;
3. Fixed issue where the player might crash when pressing the Return button after adding tracks to a new playlist;
4. Fixed issue where a few particular tracks could not be added to the Favorites list;
5. Fixed issue where there might be no sound or abnormal sound output in a few cases;
6. Fixed issue where the volume through headphone output could not be adjusted while in USB DAC mode if the "Line out mode" was set to "Fixed level";
7. Miscellaneous bug fixes.

Steps to Upgrading via microSD card:

- Please ensure that the X3MKIII is adequately charged (preferably fully charged) before the upgrade so to prevent power failure during upgrade.
- Choose a card with FAT32 file system (recommended). A micro SD card with exFAT or FAT file system also can be used to upgrade the X3MKIII.
- Insert the card into the card slot of the X3MKIII and connect the player to the computer via USB
- Copy the downloaded firmware file named X3_Mark_Ⅲ.fw to the root directory of the micro SD card. (If you have downloaded the .zip firmware package, you'll also need to unzip it first. Of course, if it is already the .fw file, then there is no need to unzip it.). Please do not rename the firmware file. The X3MKIII will NOT recognize the firmware file if you rename it.
- Disconnect the X3MKIII from the computer and turn it off.
- Hold the “Shortcuts” key (the key to the upper left of the touch wheel) and then press the “Power / Lock” button to turn on the X3MKIII. The following firmware upgrade dialog will appear. Firmware updating - then - Firmware updating successful
- Do not press buttons or turn the dial on the X3MKIII while the upgrade is in progress.
- When the firmware upgrade is complete, the X3MKIII will restart automatically.
- It is suggested to delete the X3_Mark_Ⅲ.fw file from the micro SD card after the update is complete.
- Please update the media library again after the firmware update.
- If the update process fails, please change to use a blank microSD card with capacity under 32GB, and directly format it by the X3MKIII before upgrading again.
- The original file data in the micro SD card will not get corrupted when upgrading.
- There is no need to update each firmware, and please just load the latest firmware and upgrade the unit directly.
- You can check the firmware version by "System settings"->"About X3".

About Music Player Updates:

In case your device has encountered various problems that this release can fix, or if the same release comes to add certain features that you can make use of, then you should definitely take into account upgrading.

Usually, to do that, you must get the downloadable file (unpack it if necessary) and transfer it to the player through any available method, and start the upgrade process from the device's setup menu.

However, given the large variety of music players and the many ways to enter update mode, it would be best if you read the product's installation guide and initiate this task only when you have familiarized yourself with the steps.

To apply this firmware, take into account all the aspects mentioned above, hit the download button and update your music player. In addition to that, make sure you constantly check with our website to stay “updated one minute ago.”

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Other Drivers