PCI-DB.com
  1. Driver
  2. Scanner Digital Camera Webcam
  3. Fujifilm FinePix AX240 Camera Firmware 1.01

Fujifilm FinePix AX240 Camera Firmware 1.01 Download

Posted at March 28, 2024 by PCI-DB Team

Install Driver Automatically
Device NameFujifilm FinePix AX240 Camera Firmware 1.01
CategoryScanner Digital Camera Webcam
ManufacturerFujifilm
File Size4.2 MB
Supported OSOS Independent

Fujifilm FinePix AX240 Camera Firmware 1.01 Description

Fixes:

- It corrects the problem that unwanted number of sheets are printed by setting with "PictBridge" function.

NOTE:

- For using PictBrige function, connection between the camera to the printer is required

Firmware upgrading procedure

Firmware upgrading has five steps
1. Check the firmware version.
2. Download the firmware upgrade and the transfer program onto your PC.
3. copy "FPUPDATE.DAT" to the memory card.
4. Update the firmware.
5. Check the upgraded firmware.

Firmware version checking procedure:

- Insert a blank formatted memory card in the camera. Turn on your FinePix while holding down the [DISP/BACK] button. 
- The number displayed on the screen is the camera’s "CURRENT" firmware version.
- Use of either of the following batteries:
Fully-charged AA-size Ni-MH batteries
New AA-size alkaline batteries

About Digital Camera Firmware:

Updating to a newer firmware version than the one already installed on your camera can improve the device’s overall performance and stability, resolve various issues, and add support for newly developed features or enhance existing ones.

On the other hand, downgrading the camera’s firmware can recover its functionality in the unlikely event the currently installed version is faulty or the device’s performance dropped after an upgrade. However, bear in mind that applying an earlier build might not always be possible.

It is recommended that changing the camera’s firmware be performed when the new release resolves an issue that your device has been encountering, or adds a new feature (or enhances an existing one) that could prove useful for you.

This process isn’t intended to be destructive, but still, it’s best to save all your personal data and configurations before applying a different firmware. Moreover, make sure that the battery is fully charged and don’t use the camera’s buttons while the installation is in progress.

When it comes to the update method, usually, you must copy the firmware file onto a compatible memory card, insert it into the camera, and browse from the menu to the device’s update section.

However, each device has various ways to enter the update mode and particular steps that should be taken for a successful upgrade, therefore make sure you read the product’s installation guide.

That being said, if you consider that this firmware improves your device in any way, then hit the download button and get the desired version; if not, check with our website as often as possible so that you don’t miss the update that will boost your camera’s performance.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Fujifilm Drivers

Find Missing Drivers

© 2024 PCI-DB.com - PCI Database Replacement. All rights reserved.