ECS P67H2-A (1.1) Motherboard NEC USB Driver 2.0.30.0 Download

Posted at May 5, 2024 by PCI-DB Team

ECS P67H2-A (1.1) Motherboard NEC USB Driver 2.0.30.0 Description

Specification:

CPU
- LGA1155 socket for new 2nd Generation Intel Core/Pentium/Celeron Processors
- Supports Intel Turbo boost 2.0 technology
- Support Hyper-Threading Technology CPU
- 12 Phase Power Design with VRD 12 Compliant
- DMI 5.0GT/s

CHIPSET
- Intel P67 Express Chipset

GRAPHICS
- Lucid Hydra Core Technology Support
- Support ATI CrossFireX Technology

MEMORY
- Dual-channel DDR3 memory architecture
- 4 x 240-pin DDR3 DIMM socket support up to 32 GB
- Support DDR3 up to 2133(OC)/1866(OC)/1600(OC)/1333/1066 DDR3 SDRAM

EXPANSION SLOT
- 3 x PCI Express Gen 2.0 x16 slots
- 2 x PCI Express x1 slots
- 2 x PCI slots

STORAGE
- Support by Intel P67
• 4 x Serial ATA 3.0Gb/s devices
• 2 x Serial ATA 6.0Gb/s devices
• RAID0, RAID1, RAID5, RAID 10 configuration
• 2 x eSATA 6.0Gb/s ports supporting external SATA 6.0Gb/s devices

AUDIO
- Realtek ALC892 8-Ch High Definition audio CODEC
- Compliant with HD audio specification

LAN
- Dual RealTek RTL8111E Gigabit Fast Ethernet Controllers with Teaming

REAR PANEL I/O
- 1 x PS/2 keyboard/mouse combo port
- 2 x RJ45 LAN connectors
- 1 x Audio port (Line-in, Line-out, Mic-in)
- 1 x optical S/PDIF Out connector
- 1 x Clear_CMOS button
- 4 X USB3.0 ports
- 6 x USB 2.0 ports
- 2 x eSATA 6.0Gb/s ports

INTERNAL I/O CONNECTORS & HEADERS
- 4 x SATA 3Gb/s connectors
- 1 x 24-pin ATX Power Supply connector
- 1 x 8-pin ATX 12V Power Connector
- 1 x 4-pin CPU_FAN connector
- 1 x 4-pin SYS_FAN connector
- 1 x 3-pin PWR_FAN connector
- 2 x SATA 6Gb/s connectors
- 4 x USB 2.0 headers support additional 8 USB ports
- 1 x Power on button
- 1 x Reset button
- 1 x USB 3.0 header supports additional 2 USB 3.0 Ports
- 1 x Front panel switch/LED header
- 1 x onboard Buzzer
- 1 x Front panel audio header
- 1 x 7S-LED Display
- 1 x SPDIF out header
- 1 x Serial port header

USB
- Support by 2 NEC USB3.0 Controller
- Support 6 USB3.0/2.0 ports
- Up to 14 USB 2.0/1.1 ports

SYSTEM BIOS
- AMI BIOS with 32MB SPI ROM
- Supports Plug and Play, STR (S3) / STD (S4) , Hardware monitor, Multi Boot
- Supports ACPI & DMI
- Audio, LAN, can be disabled in BIOS
- F7 hot key for boot up devices option
- Support over-clocking
- Support eJIFFY
- Support eBLU
- Support eDLU
- Support eOC
- Supports ACPI 3.0 revision
- Support eSF
- Support eGS

FORM FACTOR
- ATX Size, 305mm*244mm

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related NEC Drivers