MSI 740GTM-P25 v1.5 VIA HD Audio Driver 5.10.01.1090 for XP Download

Hyper Transport Bus

• HyperTransport 1.0 supporting speed up to 1000MT/s

Chipset

• AMD 740G and SB710 Chipset

Main Memory

• Supports Dual DDR2 667/800/1066
- 2 DDR2 DIMMs (240pin / 1.8V)
- Supports a maximum memory size up to 8GB.

Slots

• 1 PCI Express x16 slot with x16 operation (PCI Express Bus SPEC V1.0 compliant)
• 2 PCI Express x1 slots
• 1 PCI slot, support 3.3V/ 5V PCI bus Interface.

On-Board IDE

• One IDE port by AMD SB710
- Supports Ultra DMA 66/100/133 mode
- Supports PIO, Bus Master operation mode
- Can connect up to two IDE devices

On-Board SATA

• 6 SATA II (1~6) ports by AMD SB710
- Supports storage and data transfers at up to 3Gb/s

RAID Function

- SATA II 1~6 support RAID 0, 1, 0+1, JBOD mode by AMD SB710
MSI Reminds You...
• The RAID setup floppy disk is optional depending on the districts. You can download the files from the website to make the setup disk.

Audio

• Chipset integrated by VIA VT1708S
- Compliant with Azalia 1.0 Spec

LAN

• Atheros PCI-E GbLAN controller AR8131M
- Integrated Fast Ethernet MAC and PHY in single chip
- Supports 10Mb/s, 100Mb/s and 1000Mb/s
- Compliance with PCI-Express Bus specification v1.0a

Internal I/O Connectors

- ATX 24-pin power connector
- ATX 4-pin 12V CPU power connector
- CPU x 1 / System x 1 FAN connectors
- CD-in connector
- Front panel audio connector
- Front panel connector
- Chassis intrusion switch connector
- 2 x USB 2.0 connectors
- 1 x Floppy disk drive connector
- 6 x Serial ATA II connectors
- 1 x ATA133 HD connector
- 1 x Serial port connector
- 1 x Parallel port connector
- 1 x SPDIF-out connector
- Clear CMOS jumper
- 1 x OC Switch
- 1 x TPM module header
MSI Reminds You...
• The floppy disk cable will be optional.

Back Panel I/O Ports

- 1 x PS/2 keyboard
- 1 x PS/2 mouse
- 1 x 6 in 1 audio jack
- 4 x USB 2.0 ports
- 1 x RJ45 LAN jack
- 1 x Serial port
- 1 x Graphic Card port

Dimension

• 24.4cm(L) x 20.5cm(W) M-ATX Form Factor

About Sound Card Drivers:

Usually, Windows operating systems apply a generic audio driver that computers to recognize the sound card component and make use of its basic functions.

When enabled by proper files, the characteristics of the sound card (like model, manufacturer, number of channels) are completely available to computers, and all its features are made accessible.

Updating the audio version can improve sound quality, resolve different compatibility issues, fix related errors spotted throughout the product’s usage, add support for new operating systems, and bring various other changes.

As for applying this package, the steps are quite simple since each producer intends to uncomplicate things for users: just download the package, run the setup, and follow the on-screen instructions.

Bear in mind that, even though other operating systems might be compatible as well, it is not recommend that you apply any software on platforms other than the specified ones. Also, when the installation has finished, do perform a restart to ensure that all changes take effect properly.

Therefore, if you wish to install this audio version, click the download button and apply the package. Remember to check with our website as often as possible to stay “updated one minute ago.”

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related VIA Drivers