D-Link DCS-934L Rev.A1 Camera Firmware 1.04.15 Download

Posted at December 22, 2024 by PCI-DB Team

D-Link DCS-934L Rev.A1 Camera Firmware 1.04.15 Description

New Features:

1. Upgrade mydlink agent to 2.1.0-b27.
2. Change the HTTPs self-signed certificate to SHA2 algorithms.
3. Support Mydlink UID mechanism (mdb get dev_uid)
4. Change the support page hyperlink of Firmware Upgrade web-UI to www.dlink.com.
5. Updated OpenSSL to v0.9.8o.
6. Remove mDNSResponder daemon on the unit.
7. Remove the Bonjour settings from the Network Setup web-UI.
8. Change the default system time to 2016-01-01
9. Update the years in the copyright statement for IP Camera’s web-UI to 2016.
10. Add authentication to CGI /config/stream_info.cgi.
11. Offer the password validation on console port. (Console’s Password is synchronized with the admin’s password)

Problems Fixed:

1. Fixed CSRF vulnerability for the camera’s web-UI (Exclude CGI APIs).
2. Fixed the “RSA-CRT key leaks” vulnerability.
3. Fixed the “LANDAP stack overflow“ vulnerability. (discovered by search SEARCH-LAB)
4. Remove the “Arbitrary file upload interface” vulnerability. (Discovered by search SEARCH-LAB).
5. Fixed an issue that Time zone setting for Minsk should be GMT+3.
6. Fixed vulnerability - Authenticated Arbitrary File Upload with Root Privileges. (discovered by IOActive Security)
7. Fixed vulnerability - Authenticated Root OS Command Injection in File Upload. (discovered by IOActive Security)
8. Fixed an XSS vulnerability - Stored XSS in User Name. (discovered by IOActive Security)
9. Fixed an XSS vulnerability - Reflected XSS in HTTP Host Header. (discovered by IOActive Security)

Upgrading Instructions:

Follow the steps below to upgrade the firmware:
1. Download the latest firmware file. The file is in .bin file format.
2. Log-in camera web UI and enter setup/Maintenance/Firmware upgrade 3. Click Browse… and specify the firmware file.
3. Click Upgrade. The camera starts to upgrade and will reboot automatically when the upgrade completes.

About Camera Firmware:

Updating to a newer firmware version than the one already installed on your camera can improve the device’s overall performance and stability, resolve various issues, and add support for newly developed features or enhance existing ones.

On the other hand, downgrading the camera’s firmware can recover its functionality in the unlikely event the currently installed version is faulty or the device’s performance dropped after an upgrade. However, bear in mind that applying an earlier build might not always be possible.

It is recommended that changing the camera’s firmware be performed when the new release resolves an issue that your device has been encountering, or adds a new feature (or enhances an existing one) that could prove useful for you.

This process isn’t intended to be destructive, but still, it’s best to save all your personal data and configurations before applying a different firmware. Moreover, make sure that the battery is fully charged and don’t use the camera’s buttons while the installation is in progress.

When it comes to the update method, usually, you must copy the firmware file onto a compatible memory card, insert it into the camera, and browse from the menu to the device’s update section.

However, each device has various ways to enter the update mode and particular steps that should be taken for a successful upgrade, therefore make sure you read the product’s installation guide.

That being said, if you consider that this firmware improves your device in any way, then hit the download button and get the desired version; if not, check with our website as often as possible so that you don’t miss the update that will boost your camera’s performance. 

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related D-Link Drivers