Nikon COOLPIX S3000 Camera Firmware 1.3 Download

Posted at December 22, 2024 by PCI-DB Team

Nikon COOLPIX S3000 Camera Firmware 1.3 Description

Fixes:

- An issue, that in some very rare cases prevented the battery from charging, has been resolved. 

How to verify your camera’s current firmware version:

- Turn on the camera.
- Press the MENU button to display the menu screen.
- Press the rotary multi selector to the left to highlight the menu tab, select the setup tab, and press the OK button.
- Highlight Firmware version from the setup menu and press the OK button.
- The camera's firmware version will be displayed.
- Turn off the camera.

Quick Install Guide:

- Power the camera from AC adapter unit or use a fully charged battery.
- Create a new folder with an appropriate name on your computer's hard drive.
- Download the file from the available links.
- Run the downloaded file to create a folder which contains the firmware folder.
- Use a card reader or similar device to copy the firmware folder to the root directory of a memory card formatted in the camera.
- Backup any data saved to the camera’s internal memory.
- Insert the memory card into the camera's memory card slot and turn on the camera.
- Select Firmware version from the camera's setup menu and follow instructions displayed to upgrade the firmware.
- After the update is complete, turn off the camera and remove the memory card.
- Access the Firmware version item in the camera's setup menu to confirm that the firmware has been upgraded.
- Format the camera’s internal memory by selecting Format memory from the setup menu, and then turn off the camera. 

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Nikon Drivers