Canon EOS Camera Update Utility 2.14.20 for Mac OS Download

Posted at December 3, 2024 by PCI-DB Team

Canon EOS Camera Update Utility 2.14.20 for Mac OS Description

How to Download and Install:

- Exit all other applications when installing this software.
- Make sure that at least one of the following applications is installed: EOS Utility, EOS Viewer Utility, Camera Window DSLR, File Viewer Utility
- Download the page to a folder of your choice on your computer, and extract it.
- Run the extracted file and installation for EOS Utility will begin. (If the User Account Control window appears, follow the on-screen instructions to proceed.)
- Follow the on-screen instructions to complete the installation.
- After the installation is complete, the EOS Utility installer may ask to restart the computer. In this case, restart the computer.

Supported OSes:

- Mac OS X 10.8, 10.9
- Can also be used on OS X 10.10.

Supported Computers:

- PCs with one of the supported OSes above pre installed, that have USB ports as standard equipment. (Operation is not guaranteed on machines that have been upgraded.)
- The .NET Framework 3.0 or later is required.
- CPU: Intel Processor
 - 2 GB or greater

Supported Models:

- EOS 7D Mark II
- EOS Kiss X70 / EOS REBEL T5 / EOS 1200D / EOS Hi
- EOS M2
- EOS 70D
- EOS Kiss X7 / EOS REBEL SL1 / EOS 100D
- EOS Kiss X7i / EOS REBEL T5i / EOS 700D
- EOS-1D C
- EOS 6D
- EOS M
- EOS 60Da
- EOS Kiss X6i / EOS REBEL T4i / EOS 650D
- EOS 5D Mark III
- EOS-1D X
- EOS Kiss X5 / EOS REBEL T3i / EOS 600D
- EOS Kiss X50 / EOS REBEL T3 / EOS 1100D
- EOS 60D
- EOS Kiss X4 / EOS REBEL T2i / EOS 550D
- EOS 7D
- EOS-1D Mark IV
- EOS Kiss X3 / EOS REBEL T1i / EOS 500D
- EOS 5D Mark II
- EOS 50D
- EOS 40D
- EOS Kiss F / EOS REBEL XS / EOS 1000D
- EOS Kiss X2 / EOS REBEL XSi / EOS 450D
- EOS-1Ds Mark III
- EOS-1D Mark III

About Digital Camera Updates:

Updating to a newer firmware version than the one already installed on your camera can improve the device’s overall performance and stability, resolve various issues, and add support for newly developed features or enhance existing ones.

On the other hand, downgrading the camera’s firmware can recover its functionality in the unlikely event the currently installed version is faulty or the device’s performance dropped after an upgrade. However, bear in mind that applying an earlier build might not always be possible.

It is recommended that changing the camera’s firmware be performed when the new release resolves an issue that your device has been encountering, or adds a new feature (or enhances an existing one) that could prove useful for you.

This process isn’t intended to be destructive, but still, it’s best to save all your personal data and configurations before applying a different firmware. Moreover, make sure that the battery is fully charged and don’t use the camera’s buttons while the installation is in progress.

When it comes to the update method, usually, you must copy the firmware file onto a compatible memory card, insert it into the camera, and browse from the menu to the device’s update section.

However, each device has various ways to enter the update mode and particular steps that should be taken for a successful upgrade, therefore make sure you read the product’s installation guide.

That being said, if you consider that this firmware improves your device in any way, then hit the download button and get the desired version; if not, check with our website as often as possible so that you don’t miss the update that will boost your camera’s performance. 

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related CANON Drivers