Freecom Tough Drive Firmware for Mac OS Download

Posted at December 22, 2024 by PCI-DB Team

Freecom Tough Drive Firmware for Mac OS Description

PRODUCT SPECIFICATIONS FREECOM TOUGH DRIVE:

- CAPACITY: 320GB, 500GB, 640GB, 750GB, 1TB
- INTERFACE: USB 2.0, can also be connected to USB 1.1 port
- HARD DRIVE TYPE: 2.5” SATA, low noise, low power consumption
- DATA TRANSFER SPEED: up to 480Mbit/s (USB 2.0)
- WEIGHT: 200g / 7.05 Ounce
- DIMENSIONS: 140 x 80 x 19 mm / 5.5 x 3.15 x 0.74 inch
- MTBF: 50000 P.O.H.
- SHOCK RESISTANT: Operating 300G, non-operating 1000G
- MAX. DROP HEIGHT: 2 Metres free drop on flat surface
- CONNECTOR: Integrated, flat USB 2.0 compatible connector
- POWER REQUIREMENTS: USB powered, no adapters needed*
- ENVIRONMENTAL SPECIFICATIONS: Operating temperature: 10º C / 35º C, Storage temperature: -20º C / 70º C
MINIMUM SYSTEM REQUIREMENTS:

- PC: Intel Pentium III / AMD Duron 900 MHz or higher, 256MB RAM (Vista: 512MB RAM) or higher, CD-ROM drive, available USB 2.0 or USB 1.1 port, Windows 2000 / XP / Vista 
- MAC: PowerPC G3/G4/G5, Power Book G3/G4 or Intel Mac, 256MB RAM or higher, CD-ROM drive, available USB 2.0 or USB 1.1 port, Mac OS X v10.3 or higher

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Freecom Drivers