HP ProLiant MicroServer Gen8 Storage Controller Firmware 1.62 Download

Posted at November 2, 2024 by PCI-DB Team

HP ProLiant MicroServer Gen8 Storage Controller Firmware 1.62 Description

Fixes:

- Communication between the HP Integrated Lights-Out (iLO) and the HP Smart Array controller may be lost resulting in an IML entry indicating a failed controller.
- In some cases, incorrect drive temperatures were reported in an HP D2220sb enclosure, resulting in a system shutdown.
- VMware might hang when a VM with 2 or more RDMs used a Smart Array controller to access an HP P2000 G3 or HP MSA 2040 SAN storage device.
- Improved RAID 1 performance for small block random write workloads on SSD configurations.
- A controller lockup could occur if the controller was configured with a SmartCache smaller than 8GB.
- On some power cycles, the supercap would always report that it was charging, even though charging had completed.
- A self-test was revised to correct for false encryption engine failures.
- Following a reboot, a 0x13 lockup error could occur while encrypting an existing logical volume.
- When a Solid State Drive was hot-removed during IO and HP SmartPath was enabled, a 0xE3 lockup could occur.
- Fixes for various POST messages that were displayed when an HP ProLiant DL580 Gen8 server was running UEFI have been implemented. Examples of the POST Messages that were displayed are: Uncorrectable memory error, Inconsistent Drive count message, and Legacy POST ASSERT with bootable HDD removed.

Enhancements/New Features:

- Enabled support for 4GB cache modules, which is an available option for the HP ProLiant DL580 Gen8 server .

This Smart Component provides firmware for the following storage controllers:

- Smart Array P230i
- Smart Array P430
- Smart Array P431
- Smart Array P731m
- Smart Array P830i
- Smart Array P830

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Others Drivers