Grandstream GVR3550 NVR Firmware 1.0.1.25 Download

Posted at December 26, 2024 by PCI-DB Team

Grandstream GVR3550 NVR Firmware 1.0.1.25 Description

SUMMARY OF UPDATES

- This is a major update with bugs fixing and features enhancement. Factory Reset recommended after upgrade to this firmware.
- This version started including new product GVR3552 and merging all GS NVRs with one FW

BUG FIXES

- Fixed WebGUI cannot install the ActiveX.
- Fixed NTP server no response to other IPCs sometimes.
- Fixed false popup tip message when using local HTTP upgrade.
- Fixed downgrade FW might cause no adaptive HDMI or VGA output at LocalView UI.
- Fixed the network information displayed incorrect when the device using “static IP”.
- Fixed playback via IE browser, the drag will display abnormal at 24 hour frame.
- Fixed the disconnect icon showed abnormal when modify IPC encoding setting parameters to MJEPG.
- Fixed disconnected cameras at Channel Management having issue to be listed when researching.
- Fixed after log in by right clicking to use Setup Wizard would pop up message to ask credential again.
- Fixed “Maintenance” page the PING result won’t be cleared after moving to other pages.
- Fixed single channel playback the volume may become 0.
- Fixed modification of the date & time may disable the NTP server.
- Fixed network information displayed incorrect when using Static IP.
- Fixed remote HTTP upgrade finished the reboot page stalled.
- Fixed factory reset will wipe out multicast group information.
- Fixed HDD management the RAID1 array cannot be created via webGUI.
- Fixed LocalView and remote GUI upgrade page displayed information not synchronized.
- Fixed wrong sorted display of SN at Channel Management page.
- Fixed the test email helping tips with wrong wording.
- Fixed local live view the NVR will have no audio output when click to open the voice icon.
- Fixed device crash when configure Alarm and link the “HDMI” to “camera event” or “IO alarm”.
- Fixed modifying time zone the alarm linkage email would fail.
- Fixed set to alarm duration to 1 second the alarm would not stop.
- Fixed webGUI creating volume would prompt “create volume fail” but refresh will see the progress bar.
- Fixed enable DHCP server and multicast but reboot the device the DHCP server still not enabled.
- Fixed Local Preview when opening channel audio and click “+” icon to add IPC, audio is closed.
- Fixed LiveView after adjusting the position of preview panel the video with “MJPEG” not change.
- Fixed the device cannot read multiple HDDs at ESATA interface.
- Fixed in the email sending out the IP address of the equipment will show “none”.
- Fixed alarm snapshot when sending out via email the time stamp is not correct.
- Fixed the file name with the time when alarm snapshot taken is not synchronized with system time.
- Fixed disable all beeps function will not work reliably at LocalView GUI.
- Fixed Quick Configuration completed the device will switch to 16 window and reboot.
- Fixed firmware downgrade to V1.0.1.17 or before will screw up the password.
- Fixed when manual upgrade with wrong file then the manual upgrade will always fail.
- Fixed when one of the HDD taken out the HDD management still shows it in the array.
- Fixed set time button failure at Backup
- Fixed Playback the video progress bar displayed is not accurate with the time.
- Fixed GVR3552 the fan always running.
- Fixed Search function at GSurf_Pro V2 will not find GVR355x.
- Fixed reset a channel alias will least to reset all aliases.
- Fixed Channel Management when changing from Grandstream to ONVIF the port will not add 8000.
- Fixed the login webpage display unaligned with IE8/IE9.
- Fixed Mail Server configuration error but test email still shows successful.
- Fixed when adding to max. 31 local users, the web and local GUI got screwed and not display correctly.
- Fixed the device may fall into reboot loop when adding an empty HDD.
- Fixed using UPnP mapping address to access the device the webGUI language may be wrong.
- Fixed device would crash if playing back 4 channels with more than 1080p resolution.
- Fixed when playback resource is not enough white screen is displayed when switched to full screen.
- Fixed at LocalView when change the channel the IPC audio channel will not close.
- Fixed time adjustment parameters will not get saved after reboot will lost all the changed setting.
- Fixed device not support ONVIF cameras with resolution more than 1080p.
- Fixed the video cannot be previewed when there are more than 2% packet loss.
- Fixed the video may pause when playback video with resolution more than 1080p.
- Fixed the issue that DHCP server and NTP server cannot be used.
- Fixed Channel may disappear at Local View Control.
- Fixed at remote WebGUI playback the abnormal display when switching from single to four screens.
- Fixed GVR3550 cannot disable the full day schedule.
- Fixed audio bar grayed out when switching between single and four split screen playback.
- Fixed hot unplug USB interface will cause the WebGUI side stop control of the port.
- Fixed manually local upload file to upgrade the device will stall and manual reboot required.
- Fixed the EPTZ cannot be closed when switch to PTZ playback and exit.
- Fixed invalid PPPoE would generate error in the interface.
- Fixed the device will crash when 1st stream of the IPC is configured MJPEG.
- Fixed IP cameras not using default port 80 cannot be added.
- Fixed adding IPCs at Local and Remote at the same time will confuse the screw up the device.
- Fixed the GUI interface frozen when import local configuration file.
- Fixed the HTTP/HTTPS port can be configured to “0”.
- Fixed QR Code still use default password even the administrator password changed.
- Fixed abnormal pause when playback the recorded videos.
- Fixed playback screen messed up when playing one frame at a time, rewind then play and repeat.

ENHANCEMENTS

- Improved setup wizard by adding “Quick Setup” procedures.
- Added option of PlayBack Search via specific time at hour and minute.
- Support adding cameras via domain name.
- Added option to select PlayBack at LocalView UI by right click the mouse.
- Aligned the web display layout of Network Security setting.
- Added feature to remind new FW upgrade when configured and enabled.
- Revised wording of HDD info to “Left Time to Record”.
- Added hints when creating the array of HDDs.
- Added system warning when log in with default password.
- Added deleting previous page cache from old version of plugin and update the page.
- Added Open Door feature when binding with Grandstream IP Cameras with latest firmware.
- Allowing IP Camera 1st steam recorded with H.264, 2nd stream using MJPEG for remote view without popping error at NVR but not displayed at NVR due to MJPEG not supported.
- Added ability to import format incorrect configuration file.
- Added warning before creating new petition and formatting the HDDs.
- Added prompt message when no more HDD space available for recording.
- Revised wrong tip wording when the HDD is empty.
- Revised the VLAN tooltips language wording.
- Remark added when selecting unsupported video code and resolution.
- Added prevention to avoid HDDs be deleted when under recording mode.
- Enhance the mail setting by allow max. 20 for name and 40 for subject in characters.

About VoIP System Updates:

Firmware updates for VoIP Systems are very complex and usually contain many bug fixes, security improvements and compatibility enhancements, because the base system must be able to connect to webcams, video conference devices and the like.

Upgrading your VoIP System firmware should be done as often as possible to keep your device up to date with new security standards, and improve the native plug and play capabilities of your device.

Although beta firmware are usually full of new and exciting features, updating to them should only be done after thoroughly reading the changelog and making sure that you still retain phone functionality. Remember to check if you can revert to a more stable version as well, in case the new update is not what you were expecting.

If you intend to apply this update, please make sure that the package is compatible with your VoIP System, hit the download button, follow the installation instructions and enjoy. Check out our website as often as possible in order to keep your device “Updated one minute ago.” 

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Grandstream Drivers