ECS G41T-M16 (V1.0) Realtek LAN Driver 5.780.1228.2010/6.246.1230.2010/7.37.1229.2010 for XP/Vista/Windows 7 Download

Posted at November 24, 2024 by PCI-DB Team

ECS G41T-M16 (V1.0) Realtek LAN Driver 5.780.1228.2010/6.246.1230.2010/7.37.1229.2010 for XP/Vista/Windows 7 Description

Specs:

CPU
- LGA775 socket for Core2 Quad/ Core2 Duo/ Pentium Dual Core/ Celeron Dual Core/ Celeron 400 series /Pentium 4/ Celeron D processors
- LGA775 socket for latest Intel 45nm Multi-Core processors
- FSB 1333/1066/800 MHz

CHIPSET   
- Intel G41 & ICH7
- North Bridge: Intel G41
- South Bridge: Intel ICH7

GRAPHICS
- Integrated Intel Graphics Media Accelerator X4500 (GMA X4500)
- Integrated DirectX 10 graphics processor

MEMORY
- Dual-channel DDR3 memory architecture
- 2 x 240-pin DDR3 DIMM socket support up to 8 GB
- Support DDR3 up to 1333(OC)/1066/800 DDR3 SDRAM

EXPANSION SLOT
- 1 x PCI Express x16 Gen2.0 slot
- 1 x PCI Express x1 slot
- 1 x PCI slot

STORAGE
- Support by Intel ICH7
2 x Serial ATA 3.0Gb/s devices
2 x Ultra DMA100/66 devices

AUDIO
- VIA VT1705 6-channel audio CODEC
- Compliant with HD audio specification

LAN
- Realtek 8105E 10/100 Lan
- Realtek 8111E Giga Lan (Optional)

REAR PANEL I/O
- 4 x USB 2.0 Ports
- 1 x D-sub(VGA)
- 1 x RJ45 LAN connector
- 1 x Audio port
- 1 x PS/2 keyboard & PS/2 mouse connectors

INTERNAL I/O CONNECTORS & HEADERS
- 1 x 24-pin ATX Power Supply connector
- 1 x 4-pin ATX 12V connector
- 1 x 4-pin CPU_FAN connector
- 2 x USB 2.0 headers support additional 4 USB 2.0 Ports
- 2 x SATA 3Gb/s connectors
- 1 x COM2 header (optional)
- 1 x Case open header
- 1 x Front panel switch/LED header
- 1 x Front panel audio header
- 1 x Speaker header
- 1 x Clear CMOS header

SYSTEM BIOS
- AMI BIOS with 8Mb SPI Flash ROM
- Support eBLU
- Support eDLU
- Support eSF

FORM FACTOR
- Micro-ATX Size, 225mm*170mm

About Ethernet Driver:

Windows platforms generally apply a generic driver that allows motherboards to recognize the Ethernet component.

However, in order to make use of all network card (adapter) features, you must install a proper LAN driver that enables the hardware. This task enables systems to connect to a network, as well as collect all component characteristics such as manufacturer and chipset.

If you intend to update the driver version, know that this process can add support for new OSes, fix different compatibility problems, resolve related errors encountered during the product’s lifetime, as well as include various other changes.

When it comes to the actual installation procedure, we should note that most producers try to make it as easy as possible, so following the steps should be a breeze: just get the downloadable package, run the setup, and follow the on-screen instructions.

There is a chance that other OSes could also be suitable, but it is not advisable that you install this release on platforms other than the specified ones. Remember to perform a system reboot once done, to allow all changes to take effect properly.

Therefore, if you wish to apply this version, click on the download button and enable your network card. To stay up to speed with the latest updates, check back with our website as often as possible.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related REALTEK Drivers