Buffalo TS5210DF NAS Firmware 3.30 for Mac OS Download

Posted at November 21, 2024 by PCI-DB Team

Buffalo TS5210DF NAS Firmware 3.30 for Mac OS Description

Added and Modified Features

[WebAccess]
- Subfolders’ access restrictions and access restrictions using domain users are now supported.
- Owners and access permissions are now displayed on the detail panel of the WebAccess browser console.

[Update Notification]
- Usage information will now be sent automatically after updating firmware. To prevent this, disable update notification.

[Backup and Replication]
- The entered backup device access key can now be displayed.

[Settings]
- Easy Admin is no longer available. Settings that were previously available on Easy Admin are now available from setup wizard.
- Descriptions of system default users and groups are now available in every display language.
- Modified the default file extension to CSV on the file selection window when importing users.

Bug Fixes

[System]
- Fixed a bug where the TeraStation did not boot up when a system file was corrupted. The corrupted system file is now recovered automatically.
- Fixed a bug where Settings could not be logged in to.

[Replication]
- Fixed a bug where a replication error occurs after failover was configured and then backup was sequentially configured.
- Fixed a bug where a replication error occurs when disconnecting and reconnecting the USB drive after replication task was created.
- Fixed a bug where macOS temp files such as .DS_Store were transferred to the replication target folder.
- Fixed a bug where unavailable rsync-compatible devices were displayed in the available server list.

[Email Notifications]
- Fixed a bug where a notification email were not sent to certain email addresses.
- Fixed a bug where importance levels for antivirus categories were not appropriate.
- Fixed a bug where information for only one drive in the RAID array was contained in the notification email.

[Network]
- Fixed a bug where the connection was randomly disconnected.

[RAID]
- Fixed a bug where if a drive as part of a RAID array was disconnected while the TeraStation is on, and then the RAID array is removed and the TeraStation is turned off, then the drive is reconnected and the unit turned on, the status of all drives will show “Failed”.
- Fixed a bug where the RAID array did not rebuild using a spare drive if a drive in the RAID array is disconnected while the TeraStation is off and then turned on.

[Folder Setup]
- Fixed a bug where a checkbox was not displayed for the created shared folders in the folder list so that the folders could not be selected.
- Fixed a bug where a shared folder could not be created even if a name that contains an underscore is set for the folder name.

[Power Management]
- Fixed a bug where the “Wake Up TeraStation After Power Supply Recovers” option did not work on the TS3010 series TeraStations so that the unit did not boot up.
- Fixed a bug where the UPS sync settings were not applied.

[LCD Panel]
- Fixed a bug where the LCD panel remained lit even while the TeraStation was off after drive setup was finished.

[Workgroup/Domain]
- Fixed a bug where if a specific number of local users and groups are on the TeraStation, an error message will appear when the TeraStation joins the Active Directory domain.

[Backup]
- Fixed a bug where a setting could be selected when editing a backup job even if that setting could not be configured originally.
- Fixed a bug where a backup error were not display when the backup job was canceled due to changing any settings while the backup job was running.
- Fixed a bug where a backup job failed because either backup source or destination NAS could not be recovered from standby mode even if both backup source and destination NAS has configured sleep mode.
- Fixed a bug where the help link address of the backup error code was not correct.

[SNMP]
- Fixed a bug where iSCSI-related information was not displayed.

[Failover]
- Fixed a bug where a failover error message was displayed when cancelling the maintenance mode if the TeraStation has too many files.
- Fixed a bug where failover settings were not copied to the backup TeraStation properly.

[Drive Setup]
- Fixed a bug where recoverable firmware versions did not match with each model’s initial version.

[SMB]
- Fixed a bug where a shared folder could not be accessed by a “guest” user.
- Fixed a bug where access permissions of the recycle bin folder or files in the recycle bin were not configured correctly if “Recycle Bin Permissions” was configured to “Administrator only”.

[iSCSI]
- Fixed a bug where a volume was not displayed if it is created with block I/O and WCE enabled.

[Settings]
- Fixed a bug where some messages were displayed in Japanese even if the display language was configured to English.
- Fixed a bug where unnecessary help contents were displayed when a power user logs in Settings.
- Fixed a bug where system-reserved addresses such as loopback address could be configured.
- Fixed a bug where the displayed settings information did not match to the settings actually configured on the UPS sync settings page.
- Fixed a bug where some settings could not be changed if a shared folder was created by a power user.
- Fixed other minor layout bugs.

Caution:

- Please consult your local technical support representative if you experience any problems caused by this firmware update.
- Do not turn the unit off until the update is finished. It will take several minutes. You will receive a message when the update is finished.
- USB drives are not mounted automatically after a firmware update. To mount them, unplug and then reconnect them.

How to Use the Updater:

1. Connect the TeraStation properly and configure the TeraStation and a computer to run the updater on the same network subnet. The subnet masks should be the same and the first three numbers of the IP addresses should be the same. The last number of the IP addresses should be different.
For example, if the IP address and subnet mask of the computer are
" 192.168.0.10 , 255.255.255.0 "
and the IP address and subnet mask of the TeraStation are
" 192.168.1.150 , 255.255.255.0 "
then the updater will _not_ work properly.
In this case, reconfigure the TeraStation's IP address and subnet mask to
" 192.168.0.150 , 255.255.255.0 ".
Then they will be on the same subnet and the updater will work properly.
2. Close all applications. Also, stop or exit any firewall software.
3. Extract the downloaded file and run "TSUpdater.exe". When a TeraStation is detected, an update window will open.
4. Select the TeraStation to update if multiple TeraStation are connected.
5. Click "Update" and enter the TeraStation's admin password.
6. Click "OK".
7. Transferring and updating the firmware will start. Wait until it finishes. The info LED will blink during the update.
8. When the update finishes, a message will be displayed.

About Network-Attached Storage Updates:

Upgrading the Network-Attached Storage (NAS) firmware can improve the system's overall performance, stability, and security by adding various fixes for related issues, enhancing existing features (or adding support for new ones), or updating different applications.

Due to the high number of NAS manufacturers, as well as network storage types, installing a new firmware might not be always as easy as it appears – and not too safe either. Failing to perform a software update can cause serious malfunctions to the network storage.

So, before you even consider applying this release, carefully read the installation guide and initiate the process only when you have understood and completely familiarized yourself with all the steps.

Moreover, it would be best if you take into account using a UPS unit (Uninterruptible Power Supply) to perform this task, because no power disruption should affect the upgrade.

With all these aspects in mind, after you have read the installation guide, click the download button to apply this firmware version to your NAS. Remember to check back with our website in order to stay up to speed with the latest releases.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Buffalo Drivers