Actiontec GT784WN Router Firmware 1.0.13 Download

Posted at December 3, 2024 by PCI-DB Team

Actiontec GT784WN Router Firmware 1.0.13 Description

Interfaces:

- Four 10/100 BaseT Ethernet LAN
- One RJ-11 ADSL Line
- One RJ-11 Phone Port

Wireless:

- 802.11n
- 802.11 b/g
- External RADIUS Server Support
- Multiple SSID
- WPS
- WMM, WMM PowerSave (available upon request)
- Wireless Security
- Wi-Fi Protected Access (WPA, WPA2)
- TKIP & AES encryption
- 802.1x authentication
- Pre-Shared Key (PSK)
- MAC Address Filtering

Remote Management:

- User-enable Remote Management
- TR069 Carrier Remote Management
- TR064 Local Management

Advanced Security:

- Firewall
- Stateful Packet Inspection
- NAT
- Website Blocking
- Web Service Blocking
- URL Keyword-Based Filtering
- Customizable Filtering Policies per Computer
- Internet Traffic Logging
- Denial of Service (DOS) Protection
- Demilitarized Zone (DMZ)
- Intrusion Detection
- IP Protocol Filtering

QoS Support:

- Diffserv
- 802.1p/q Prioritization
- Random Early Detection
- Pass-through of WAN-side DSCPs, PHBs & Queing to LAN-side devices
- Prioritization via DHCP options

Advanced Features:

- DHCP Server Option
- DHCP Server/PPPoE Server Auto Detection
- DNS Server
- Full Bridge Device Control
- LAN IP & WAN IP Address Selection
- MAC Address Cloning
- Port Forwarding
- PPPoE Support
- IGMP v1, v2, v3 (available soon)
- MAC Address Filtering
- IGMP proxy and snooping

About Router Firmware:

Before you consider downloading this firmware, go to the system information page of the router and make sure that the currently installed version isn’t either newer or matching this release.

Due to the large variety of router models and different methods for upgrading the device, it is highly recommended that you read and, above all, understand the installation steps before you apply the new firmware, even if you are a power user.

In theory, these steps shouldn’t be much of a hassle for anyone, because manufacturers try to make them as easy as possible, even if they don’t always succeed. Basically, you must upload the new firmware to the router through its administration page and allow it to upgrade.

If you install a new version, you can expect increased security levels, different vulnerability issues to be resolved, improved overall performance and transfer speeds, enhanced compatibility with other devices, added support for newly developed technologies, as well as several other changes.

If you’re looking for certain safety measures, remember that it would be best if you perform the upload using an Ethernet cable rather than a wireless connection, which can be interrupted easily. Also, make sure you don’t power off the router or use its buttons during the installation, if you wish avoid any malfunctions.

If this firmware meets your current needs, get the desired version and apply it to your router unit; if not, check with our website as often as possible so that you don’t miss the update that will improve your device.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Others Drivers