Buffalo TS-2RZS NAS Firmware 2.46 Download

Posted at November 21, 2024 by PCI-DB Team

Buffalo TS-2RZS NAS Firmware 2.46 Description

New and Modified Features

- Port trunking with ports on expansion cards is now supported. If you configure port trunking with the ports, only "Dynamic link aggregation" will be available for the port trunking mode.
- Updated the OpenSSL library to version 1.0.2.

Backup Fixes:

- Fixed a bug where backup failed when the TeraStation is connected to two or more networks in different address spaces.

Replication Fixes:

- Fixed a bug where replication failed if any file handling occurred for the replication source target for more than 8 hours.

Network Fixes:

- Fixed a bug where access restrictions with domain users reverted to "disabled" after restarting the unit.

Drives Fixes:

- Fixed a bug where the E30 error message disappeared when restarting the TeraStation while a failed drive was connected and the RAID array was in degraded mode.

Settings Fixes:

- Fixed a bug where a user shared folder access restrictions were not saved after configuration.
- Fixed a bug where a "No response received from NAS." message is displayed when changing the language settings from 'Management' - 'Name/Time/Language' - 'Language'.

Before updating the firmware:

- Please consult your local technical support representative if you experience any problems caused by this firmware update.
- Do not turn the unit off until the update is finished. It will take several minutes. You will receive a message when the update is finished.
- USB drives are not mounted automatically after a firmware update. To mount them, unplug and then reconnect them.

How to Use Updater:

- Connect the TeraStation properly and configure the TeraStation and a computer to run the updater on the same network subnet. The subnet masks should be the same and the first three numbers of the IP addresses should be the same. The last number of the IP addresses should be different.
- Close all applications. Also, stop or exit any firewall software.
- Extract the downloaded file and run "TSUpdater.exe". When a TeraStation is detected, an update window will open.
- Select the TeraStation to update if multiple TeraStation are connected.
- Click "Update" and enter the TeraStation's admin password.
- Click "OK".
- Transferring and updating the firmware will start. Wait until it finishes. The info LED will blink during the update.
- When the update is complete, a message will be displayed

About Network-Attached Storage Updates:

Upgrading the Network-Attached Storage (NAS) firmware can improve the system’s overall performance, stability, and security by adding various fixes for related issues, enhancing existing features (or adding support for new ones), or updating different applications.

Due to the high number of NAS manufacturers, as well as network storage types, installing a new firmware might not be always as easy as it appears – and not too safe either. Failing to perform a software update can cause serious malfunctions to the network storage.

So, before you even consider applying this release, carefully read the installation guide and initiate the process only when you have understood and completely familiarized yourself with all the steps.

Moreover, it would be best if you take into account using a UPS unit (Uninterruptible Power Supply) to perform this task, because no power disruption should affect the upgrade.

With all these aspects in mind, after you have read the installation guide, click the download button to apply this firmware version to your NAS. Remember to check back with our website in order to stay up to speed with the latest releases. 

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Buffalo Drivers