Convergent Design Odyssey7Q Recorder Firmware 1.11.100 Download

Posted at February 22, 2025 by PCI-DB Team

Convergent Design Odyssey7Q Recorder Firmware 1.11.100 Description

Zoom Memory:

- When using Pixel Zoom, the screen coordinates in 1:1 and 2:1 zoom modes are remembered from previous use.
- Drag with finger on OLED display to position zoom window.
- Window will return to same position upon returning to Pixel Zoom setting.
- Reset zoom window to center by tapping frame reference map in lower right corner.
- Coordinates retained until changing record mode or powering down Odyssey7Q.

Multi-Stream:

- Multi-Stream interface updated with A/B/C/D input selector buttons.
- Multi-Stream initializes in Quad Split view (display divided into four separate images).
- Tap A, B, C, or D buttons to select a single input for full screen display.
- Inputs can be directly switched to by selecting the corresponding button without need to scan through other inputs.
- To return to Quad Split view, tap on the currently selected input to deselect it.

Sony FS700 Record Option - K2HD in REC709 (800%):

- FS700 4K -> HD ProRes (4K2HD)
- Added support for REC709 (800%) gamma setting.
- On FS700, in Picture Profile menu, select a PP with Gamma set to ITU709(800%).
- This setting increases Dynamic Range in highlights by three stops.

Sony FS700 Record Option - 4K2HD LUTs:

- Added LUT function in 4K2HD mode.
- If S-LOG2 or REC709 (800%) is selected as camera gamma, tapping LUT button applies a LUT to adjust viewed image to a standard REC709 without altering the recording.
- LUT is applied to the OLED display as well as SDI and HDMI outputs.

Fixes & Improvements:

General:

- Menu setting Menu » outputs » Monitoring changed to Overlays to more accurately reflect function. On/off setting enables/disables image analysis tools such as Waveform and False Color to output over video signal to SDI and HDMI outputs.
- Waveform and Histogram markers remain available during recording

Multi-Stream:

- Fixed support for PSF input signals (1080psf 23.976/24/25/29.97)

Prores(HQ):

- Reduced extremely rare file corruption occurrence on particular units. Error only occurs after more than one hour of continuous recording and even then it is a rare event.
- HDMI input expanded from legalized to full range
- Fixed “Variframe mode detected” compatibility issue with Canon C300

4K2HD:

- Reduced color fringing at high contrast edges
- Reduced noise in dark areas

Apple ProRes(HQ) & 4K2HD:

- Fixed multiple file playback
- Fixed audio channel flipping between ProRes files within a clip
- Fixed end of clip playback freeze of ProRes files
- Fixed playback shift on Odyssey7Q
- Fixed Timecode accuracy on file transitions within a clipdpx
- Fixed end of clip playback issues

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related OTHERS Drivers