Gigabyte GA-P43T-ES3G (rev. 1.3) Intel SATA AHCI/ RAID Preinstall Driver 8.9.0.1023 x86 Download
Posted at November 24, 2024 by PCI-DB Team
Install Driver Automatically| Device Name | Gigabyte GA-P43T-ES3G (rev. 1.3) Intel SATA AHCI/ RAID Preinstall Driver 8.9.0.1023 x86 |
|---|
| Category | Other Drivers Tools |
|---|
| Manufacturer | INTEL |
|---|
| File Size | 303 KB |
|---|
| Supported OS | Windows XP ,Windows 2003 |
|---|
Gigabyte GA-P43T-ES3G (rev. 1.3) Intel SATA AHCI/ RAID Preinstall Driver 8.9.0.1023 x86 Description
CPU
- Support for an Intel Core 2 Extreme processor/ Intel Core 2 Quad processor/Intel Core 2 Duo processor/ Intel Pentium processor/Intel Celeron processor in the LGA775 package
- L2 cache varies with CPU
Front Side Bus
- 1600(O.C.)/1333/1066/800 MHz FSB
Chipset
- North Bridge: Intel P43 Express Chipset
- South Bridge: Intel ICH10
Memory
- 4 x 1.5V DDR3 DIMM sockets supporting up to 16 GB of system memory
- Dual channel memory architecture
- Support for DDR3 1600/1333/1066 MHz memory modules
- Support for non-ECC memory modules
Audio
- Realtek ALC888/892 codec
- High Definition Audio
- 2/4/5.1/7.1-channel
- Support for S/PDIF Out
- Support for CD In
LAN
- 1 x Realtek RTL8111D chip (10/100/1000 Mbit)
Expansion Slots
- 1 x PCI Express x16 slot, running at x16
- 1 x PCI Express x1 slot
- 5 x PCI slots
Storage Interface
South Bridge:
- 6 x SATA 3Gb/s connectors supporting up to 6 SATA 3Gb/s devices
JMicron JMB368 chip:
- 1 x IDE connector supporting ATA-133/100/66/33 and up to 2 IDE devices
iTE IT8718 chip:
- 1 x floppy disk drive connector supporting up to 1 floppy disk drive
USB
South Bridge
- Up to 12 USB 2.0/1.1 ports (6 on the back panel, 6 via the USB brackets connected to the internal USB headers)
Internal I/O Connectors
- 1 x 24-pin ATX main power connector
- 1 x 4-pin ATX 12V power connector
- 1 x floppy disk drive connector
- 1 x IDE connector
- 6 x SATA 3Gb/s connectors
- 1 x CPU fan header
- 2 x system fan headers
- 1 x front panel header
- 1 x front panel audio header
- 1 x CD In connector
- 1 x S/PDIF Out header
- 3 x USB 2.0/1.1 headers
- 1 x power LED header
- 1 x chassis intrusion header
- 1 x clearing CMOS jumper
Back Panel Connectors
- 1 x PS/2 keyboard port
- 1 x PS/2 mouse port
- 1 x parallel port
- 1 x serial port
- 1 x coaxial S/PDIF Out connector
- 6 x USB 2.0/1.1 ports
- 1 x RJ-45 port
- 3 x audio jacks (Line In/Line Out/Microphone)
I/O Controller
- iTE IT8718
H/W Monitoring
- System voltage detection
- CPU/System temperature detection
- CPU/System fan speed detection
- CPU overheating warning
- CPU/System fan fail warning
- CPU/System fan speed control
BIOS
- 2 x 8 Mbit flash
- Use of licensed AWARD BIOS
- Support for DualBIOS
- PnP 1.0a, DMI 2.0, SM BIOS 2.4, ACPI 1.0b
Unique Features
- Support for @BIOS
- Support for Q-Flash
- Support for Xpress BIOS Rescue
- Support for Download Center
- Support for Xpress Install
- Support for Xpress Recovery2
- Support for EasyTune
- Support for Easy Energy Saver
- Support for Smart Recovery
- Support for Q-Share
Bundle Software
- Norton Internet Security (OEM version)
Form Factor
- ATX Form Factor; 30.5cm x 21cm
Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer. It is highly recommended to always use the most recent driver version available.
Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.
Related INTEL Drivers