ASUS Q87T Intel LAN Driver 18.1.59.0/18.5.54.0 Download

Posted at October 30, 2025 by PCI-DB Team

ASUS Q87T Intel LAN Driver 18.1.59.0/18.5.54.0 Description

Specifications:

CPU:
- Intel Socket 1150 for 4th Generation Core i7/Core i5/Core i3/Pentium/Celeron Processors
- Supports Intel 22 nm CPU
- Supports Intel Turbo Boost Technology 2.0

Chipset:

- Intel Q87

Memory:

- 2 x SO-DIMM, Max. 16GB, DDR3 1600/1333/1066 MHz Memory
- Dual Channel Memory Architecture

Graphics:

- Integrated Graphics Processor
- Multi-VGA output support : HDMI/eDP/LVDS/DisplayPort ports
- Supports HDMI with max. resolution 4096 x 2160 @ 24 Hz / 2560 x 1600 @ 60 Hz
- Supports eDP with max. resolution 4096 x 2160 @ 24 Hz / 3840 x 2160 @ 60 Hz
- Supports LVDS with max. resolution 1920 x 1200 @ 60 Hz
- Supports DisplayPort with max. resolution 4096 x 2160 @ 24 Hz / 3840 x 2160 @ 60 Hz
- Supports up to 3 displays simultaneously

Expansion Slots:

- 1 x PCIe 3.0 x4 (black)
- 1 x mini-PCIe 2.0 x1 (full-length, black)
- 1 x mini-PCIe 2.0 x1 (half-length, black)

Storage:

- Intel Q87 chipset
- 4 x SATA 6Gb/s port(s), yellow
- 1 x mini-SATA 6Gb/s port(s), black
- Support Raid 0, 1, 5, 10

LAN:

- Intel I217LM, 1 x Gigabit LAN Controller(s)
- Realtek 8111G, 1 x Gigabit LAN Controller(s)

Audio:

- Realtek ALC887-VD 8-Channel High Definition Audio CODEC
- Supports : Jack-detection, Multi-streaming, Front Panel Jack-retasking, Anti-pop Function

USB Ports:

- 6 x USB 3.0 port(s) (4 at back panel, 2 at mid-board)
- 5 x USB 2.0 port(s) (5 at mid-board)

Back I/O Ports:

- 1 x DisplayPort
- 1 x HDMI
- 2 x LAN (RJ45) port(s)
- 4 x USB 3.0
- 2 x Audio jack(s)
- 1 x DC power connector(s)

Internal I/O Ports:

- 1 x USB 3.0 connector(s) support(s) additional 2 USB 3.0 port(s)
- 3 x USB 2.0 connector(s) support(s) additional 5 USB 2.0 port(s)
- 1 x COM port(s) connector(s)
- 4 x SATA 6Gb/s connector(s)
- 1 x SATA power connector(s)
- 1 x mSATA connector
- 1 x CPU Fan connector(s)
- 1 x Chassis Fan connector(s)
- 1 x Front panel audio connector(s) (AAFP)
- 1 x System panel(s)
- 1 x Chassis Intrusion connector(s)
- 1 x Clear CMOS jumper(s)
- 1 x eDP/LVDS switch jumper
- 1 x DIS ME jumper
- 1 x 2-pin internal DC power connector
- 1 x Stereo speaker connector
- 1 x DMIC header
- 1 x Custom solutions header
- 1 x Backlight inverter voltage selection header
- 1 x FPD brightness header
- 1 x Panel voltage selection header
- 1 x Panel off header
- 1 x eDP connector(s)
- 1 x LVDS connector(s)

Form Factor:

- Thin Mini ITX Form Factor
- 6.7 inch x 6.7 inch ( 17.0 cm x 17.0 cm )

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related INTEL Drivers