Creative Sound Blaster Tactic3D Rage Wireless Firmware 1.58.A Download

Posted at November 21, 2024 by PCI-DB Team

Install Driver Automatically

Device Name	Creative Sound Blaster Tactic3D Rage Wireless Firmware 1.58.A
Category	Sound Card
Manufacturer	CREATIVE
File Size	609 KB
Supported OS	Windows XP ,Windows Vista ,Windows XP 64 bit ,Windows Vista 64 bit ,Windows 7 ,Windows 7 64 bit ,Windows 8 ,Windows 8 64 bit

Creative Sound Blaster Tactic3D Rage Wireless Firmware 1.58.A Description

This download contains a firmware for use with your Sound Blaster Tactic3D Rage Wireless Headset on Windows operating systems. After installing this firmware, you will need to re-pair your headset and the USB wireless transmitter.

Fixes:

- Resolved firmware upgrade, intermittent connectivity and LED light up issues on USB Wireless Transmitter

Instructions to upgrade the Sound Blaster Tactic3D Rage USB Wireless Transmitter:

- Download the file onto your local hard disk.
- Uncompress the downloaded file to a folder in your local hard disk.
- Close all applications that are currently running.
- Plug in the Sound Blaster Tactic3D Rage USB Wireless Transmitter directly to your computer. Do not connect it to a USB hub.
- Ensure that the Sound Blaster Tactic3D Rage Wireless Headset is removed from your computer.
- Double-click <!--WRNTag_PackageFilename--> from the folder which stores the uncompressed files.
- Click Upgrade.
- Follow the instructions on the screen.
- Click Close to end the firmware upgrade.

Instructions to upgrade the Sound Blaster Tactic3D Rage Wireless Headset:

- Plug in the Sound Blaster Tactic3D Rage Wireless Headset directly to your computer. Do not connect it to a USB hub.
- Power on the Sound Blaster Tactic3D Rage Wireless Headset.
- Ensure that the Sound Blaster Tactic3D Rage USB Wireless Transmitter is removed from your computer.
- Double-click <!--WRNTag_PackageFilename--> from the folder which stores the uncompressed files.
- Click Upgrade.
- Follow the instructions on the screen.
- Click Close to end the firmware upgrade.
- After installing the firmware, re-pair your headset and the USB wireless transmitter.

WARNING:

- Please ensure your device is connected during installation.
- Do not disconnect the device while the firmware is being upgraded.
- Do not restart your PC during the firmware upgrade.
- Do not use a USB hub for installation.

Manual Pairing:

- Press and hold the Microphone Mute button on the headset for 3 seconds. The connect LED will begin to flash rapidly.
- Press and hold the Connect button on the USB wireless transmitter for 3 seconds. The Connect LED on the transmitter will begin to flash rapidly.
- When the headset and the transmitter are paired, the Connect LED on both devices will stop flashing and stabilize.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related CREATIVE Drivers