Intel HNS2600TPR Compute Module OFU Firmware 01.01.0022 Download

Posted at November 21, 2024 by PCI-DB Team

Intel HNS2600TPR Compute Module OFU Firmware 01.01.0022 Description

Versions:

- BIOS: 01.01.0022
- ME: 03.01.03.043
- BMC: 01.50.10802
- FRUSDR: 1.17

BIOS 01.01.0022 Changes:

- CCB#1885: [S2600TP] Command line mechanism enable/disable clock
- CCB#1842: Add support for Unigen and Wintec DIMMs in BIOS release candidates
- CCB#1848: ITK options to tune PCIe TxEq adjustment features to support 3rd party add-in card or riser card
- [HSD-ES][1209605550]: System fails to throttle the CPU during temperature testing of dual 1100W Power Supplies
- [HSD-ES][2103616038]: [E5-2600V4] The Dedicated Management LAN Configuration field can be edited when set IPv6 Source of this field is set to Auto.
- [HSD-ES][2103616035]: [E5-2600V4] The BMC User name can set to unmatched EPS.
- [HSD-ES][1504474611]: [E5-2600V4] No DIMM Disabled error log for the DIMM slot in which the SPD-failed DIMM is installed
- CCB#1919: To add [Onboard VGA Always On] BIOS ITK/Setup option to support new GPGPU usage model
- [HSD-ES][1504488116]: [BDW] The disabled boot device will be changed to available when system retries non-EFI-based boot options
- [HSD-ES][1504483658]: CPU configuration lock bit is not set with default Setup setting
- [HSD-ES][1504437958]: [SDLS4]REACT-2017-1-OpenSSL upgrade for security vulnerability

ME 03.01.03.043 Changes:

- Flash from Grantley FW to Grantley-R FW could cause SPS reset.
- System unexpected shutdown with SPS FW exception error.
- ME FW changes P state value when no policy is active impacting performance.
- C8h command power readings for CPU domain are invalid.

BMC 01.50.10802 Changes:

- [Grantley] Fake PS1 Power In event in SEL caused by miscommunication between BMC and PSU
- [Grantley] 1100W PSU Predictive failure message has been detected
- [Grantley] PSU downgrade issue happened in factory
- upgrade PSU FW 1100w to v51 using 1100ADU00201_S3_1_1_51.bin

FRUSDR 1.17 FEATURES ADDED

- Modify master.cfg to set the 2U Riser 3 fab 2's FRU and Temp sensor.
- Update new FRUSDR utility ( FRUSDR_V14_0_Build9_AllOS ).

About Firmware Updates:

Applying a newer firmware version than the one already installed on your unit can bring various enhancements, include workarounds for diverse problems encountered by the device, and improve or add newly developed features.

On the other hand, downgrading the firmware version can recover the device's functionality in the event of a software update either turning up faulty or causing the unit's overall performance to drop. However, bear in mind that applying an older firmware isn't recommended and might not always be possible.

When it comes to the update steps, due to the large variety of devices and numerous ways for installing a new firmware, it is recommended that you carefully read and understand the upgrade steps, and consider applying a different firmware only when you have familiarized yourself with the update method.

As the installation process is most of the times quite risky, this step should be taken by users that have the ability to successfully complete the update; regular users may initiate it at their own risk. Moreover, it's best that this task be performed in a steady power environment such as the one ensured by a UPS unit.

Therefore, if you consider applying this release, hit the download button, take into account all the aforementioned aspects, and update the device's firmware. Also make sure you constantly check with our website to ensure that you don't miss a single new release.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Intel Drivers