Atomos Shogun Recorder Firmware 6.4 Download

Posted at May 31, 2025 by PCI-DB Team

Atomos Shogun Recorder Firmware 6.4 Description

New Features included in 6.4:

- New custom metadata tags - Tags used appear in the keyword collections in FCPX. The FCPX XML version has been updated to 1.4 for latest support.
- Sony FS700 and FS7 Raw to ProRes and DNxHR - please refer to instructions specific to your camera located in the AtomOS 6.4 Zip file.
- Pre-Roll Recording Option - 8 seconds HD and 2 seconds 4k.
- Option to clear all overlays from the screen - touch the centre of the monitor to cycle through 3 overlay modes.
- Genlock input enabled for synced playback/playout

3D LUT New Features:

- Option in the input page to apply the Monitor LUT to the loop out for viewing on external monitor.
- Option in the input page to record/burn-in the Monitor LUT to the recording.

Included RAW to REC709 LUT’s for record and monitor:

- Slog2 to Rec709 for FS700/FS7 – located in BUILT in 3D LUT tab (Yellow Monitor Icon>Folder Icon>Built-In Tab)
- Slog3 to Rec709 for FS7 – located in BUILT in 3D LUT tab (Yellow Monitor Icon>Folder Icon>Built-In Tab)
- Half Screen LUT option to view RAW/Video-In and LUT at same time – Can never be recorded as a half LUT for safety.

Programmable Time Lapse

- Capture any number of consecutive frames at any interval.
- Keyframe multiple intervals and use smooth transitions between them.
- Scheduled start time up to 24 hours prior to

Custom Playlist

- Play all movies in recorded order
- Select any combination movies to play
- Play Tagged Favourite files in order for quick rushes edited play-out
- Combine selected and favourite in any order and play together

Anamorphic desqueeze modes

- Panasonic 8:3 from GH4
- 2x, 1.5x, and 1.33x

Pre-loaded LUT’s provided on unit in Built-In LUT Tab

- C-Log to Rec709
- V-Log to Rec709
- FS Raw Slog2 to Rec709
- FS Raw Slog3 to Rec709

Increased low battery warnings

- 25%
- 10%

About Video Recorder Adapters:

Applying a new firmware package on your Video Recorder adapter should improve overall performance and stability, fix various issues encountered with the device, or add support for newly developed features.

The Video Recorder adapter should be carefully upgraded by a power user (that is to say, someone who has the know-how to successfully complete the process), but it can also be performed by an average user at his or her own risk.

Either way, given the fact that each producer has their own method for installing a new firmware, and that every device has a particular way to enter the update mode, you must not consider upgrading the adapter’s software until you have read and thoroughly understood the installation steps.

As a rule, said steps shouldn’t pose too much of a challenge because manufacturers strive to make them as easy as possible. As with everything else, exceptions do occur, and users should be prepared for them.

Usually, you should transfer the compatible firmware to the Recorder through a USB cable or a memory card, and afterwards enter update mode from the unit’s setup menu or through a specific power-on method.

With this in mind, if you intend to apply this release, make sure the package is compatible with your Video Recorder and that it brings about the changes you want or require; hit the download button and apply the new firmware.

Don’t forget to regularly check with our website so that you don’t miss any updates. 

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related OTHERS Drivers