Buffalo WAPS-APG600H Access Point Firmware 1.25.5 Download

Posted at April 30, 2024 by PCI-DB Team

Buffalo WAPS-APG600H Access Point Firmware 1.25.5 Description

New features:

- Added multiple VLAN functionality.

Modified features:

- Now you can choose "Basic Rate" from each bandwidth of the rate set (11n 1x and 11n 2x) when you select "User-defined" for the wireless band.
- MAC RADIUS authentication now allows re-authentication when a session times out.
- When a USB device consumes excessive power, the following message is displayed: "Connected USB device cannot be used due to excessive power consumption."

Fixed bugs:

- ARP requests between wireless clients with the same SSID may be replied by proxy if proxy ARP is enabled.
- Fixed the problem of wireless communication not being available when the device's internal temperature fluctuates between extreme temperature variations.
- Communication with connected wireless clients can now be established immediately when a wireless client roams.
- Fixed the communication failure between untagged ports in the following situation: 2 WAPS-APG600Hs are connected by WDS that is set to "Tagged", and 2 wired ports of one WAPS-APG600H are set to "Tagged" and the other ports are set to "Untagged".
- Now all configuration from BN-ADT and WL-ADT can be saved correctly.
- Fixed the problem of wireless clients from other VLANs than the management VLAN not being counted as wireless clients.
- Fixed the problem of automatically chosen channels not displaying correctly in WL-ADT.
- Fixed session timeouts with RADIUS server and IEEE802.1x/EAP authentication.
- Fixed the LED controls when the 11a beacon interval is set to 50 ms or less.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Others Drivers